Technovision PDVR-E8W1N2-AI Quick Start Manual And Manual page 282

Step 2 Configure the settings for the SNMP parameters.
Parameter Description
Enable Enable the SNMP function.
Select the check box of SNMP version(s) that you are using.
Version
SNMP Port Indicates the monitoring port on the agent program.
Read Community
Indicates the read/write strings supported by the agent program.
Write Community
Indicates the destination address for the agent program to send the
Trap Address
Trap information.
Indicates the destination port for the agent program to send the
Trap Port
Trap information.
Read-Only Enter the user name that is allowed to access the Device and has
Username the "Read Only" permission.
Read/Write Enter the user name that is allowed to access the Device and has
Username the "Read and Write" permission.
Authentication Type Includes MD5 and SHA. The system recognizes automatically.
Authentication Enter the password for authentication type and encryption type.
Password The password should be no less than eight characters.
Figure 5-266
Table 5-70
The default version is V3. There is a risk of select V1 or V2.
Local Configurations 266