Malfunction
flashes.
burns.
flashes.
"E:30/-20"
All other error codes.
Device not working.
Program does not start.
Cause and Troubleshooting
Voltage undershoot can cause program extension.
No solution possible.
Temperature is too high.
Wait for the temperature to drop.
▶
→ "Program cancel", page 33
▶
Water level is too high.
Select a suitable program for draining.
▶
→ "Programs", page 26
Door is not closed.
▶
Close the door.
Laundry is jammed in the door.
Remove trapped laundry.
▶
Detergent dosage is too high.
Reduce the amount of detergent for the next wash
▶
with the same load.
Additional water filled.
▶
Do not fill the appliance with additional water during
operation.
Solenoid valve defective.
Please contact customer service.
▶
→
"After-sales service", Page 51
Malfunction
Please contact customer service.
▶
→
"After-sales service", Page 51
Mains plug of the power cable is not plugged in.
Connect the device to the power supply.
▶
The fuse in the fuse box has blown.
Check the fuse in the meter cupboard.
▶
Power supply has failed.
Check whether the interior lighting or other devices
▶
are working.
Start/Refillwas not pressed.
PressStart/Refill.
▶
Door is not closed.
▶
Close the door.
Child lock is activated.
TroubleshootingNL
43