Table of Contents
Advertisement
Phone Book
You can store up to 10 names and phone numbers in the phone book.
Using the phone book, you can make a call by selecting a name on the
handset display.
Storing Names and Numbers
Make sure the unit is in the standby mode.
(AUTO/PROGRAM)
1
Press
2
Press a memory station number (
≥If an item is already stored, that information is
displayed.
(EDIT)
3
Press
4
Enter a name, up to 15 characters, using
the dialing buttons (
≥See the steps for entering names and symbols
(p. 21).
≥If a name is not required, press (EDIT) and go
to step 6.
(EDIT)
5
Press
6
Enter a phone number, up to 24 digits.
≥Each time you press (MUTE/CLEAR), the digit
is erased from the right. To erase all of the
digits, press and hold (MUTE/CLEAR).
≥To show the cursor, press (›) after entering a
digit. Each time you press (MUTE/CLEAR),
the digit under the cursor is erased.
≥When you store the last number dialed, press
(PAUSE/REDIAL) instead of entering a phone
number.
(EDIT)
7
Press
≥A beep sounds.
≥The handset will return to the standby mode.
≥If a pause is required for dialing, (PAUSE/REDIAL) can be stored in a phone
number counting as one digit (p. 26) in step 6.
≥You can exit the programming mode at any time by pressing (OFF).
≥If you do not press any buttons for 60 seconds, the unit will return to the standby
mode.
20
.
.
(1)
(9)
to
),
.
to save.
(0)
(9)
to
).
(›)
(‹)
or
.
SELECT STATION#
EMPTY
ENTER NAME :
ENTER NUMBER :
TOM
TOM
TOM
Advertisement
Table of Contents
