Table of Contents
Advertisement
Using the Caller List
Viewing the Caller List
To check who has called, follow the steps below.
Make sure the unit is in the standby mode.
1
Lift the handset off the base unit and press
Caller List.
≥The display will show, for example, the following:
SMITH,JACK
2
To search from the most recent call, press
To search from the oldest call, press
≥To scroll between callers, press (›) or (‹).
3
To exit the list, press
≥A beep sounds and the handset will return to the standby mode.
≥If the Caller List is empty, you cannot enter the Caller List by pressing (›) or
(‹).
≥Once new calls have been checked, "
≥If you do not press any buttons for 60 seconds, the unit will return to the standby
mode.
For assistance, please call: 1-800-211-PANA(7262)
(‹)
(OFF)
.
" will not be displayed.
(›)
(‹)
or
to enter the
(›)
.
.
"
15
Advertisement
Table of Contents
