Cleaning Before Use - Hanseatic HCDB18080DWDI User Manual

Page EN-30 Start-up
5. Level out any unevenness on the ground
using both of the front screw feet (12).
6. Tilt the appliance backwards slightly and
screw/unscrew the screw feet.
7. Repeat the adjustment until the appliance
is upright and secure. The appliance must
not wobble.
About climate categories
• Always ensure the prescribed ambient temperature is maintained (see "Intended use" on
page EN-4).
Climate category means that the appliance is intended for operation at the specified ambient
temperature.
Zone designation
extended temperate zone
temperate zone
subtropical zone
tropical zone
If the room temperature drops significantly below this, the appliance will not switch on as often.
This indicates that an unwelcome increase in temperature may occur.

Cleaning before use

In order to remove the odour which is pres-
ent in all new appliances, wipe the fridge and
(12)
freezer out prior to first use with a solution
made from 100 ml vinegar and 200 ml water.
Then wipe it out with clean water and dry all
of the parts off afterwards.
(12)
Code Definition
SN This cooling appliance is designed for use at ambient
temperatures of +10 °C to +32 °C.
N This cooling appliance is designed for use at ambient
temperatures of +16 °C to +32 °C.
ST This cooling appliance is designed for use at ambient
temperatures of +16 °C to +38 °C.
T This cooling appliance is designed for use at ambient
temperatures of +16 °C to +43 °C.