Advertisement
Water valve connections for the Detergent Drawer
V # 1
V # 2
M A I N ( H ) P R E W A S H
Path #2
Path #1
Path #4
Path #3
Pre Wash
Main Wash
It is normal for some water to remain in
the Detergent Drawer after it completes
washing. Bleach is usually flushed out
into the tub at the beginning of the wash-
ing. Also, its compartment is washed
again during the following rinse cycle,
removing any remnants.
Laundry Touch Up Paints
TOUC H UP PAINT, BLU E ONYX
TOUC H UP PAINT, IMPERIAL SIL VER
TOUC H UP PAINT, N EAT W HITE
TOUC H UP PAINT, STRATUS GR AY
TOUC H UP PAINT, TANGO RED
Training — Plus One
Help — GSPN
The unit sometimes will pause during Sanitize, or Pure Cycle, wash modes and appear not to be functional. The Sani-
tize and Pure Cycle wash cycles have target temperatures to assure washer performance. If the water temperature
doesn't meet the target temperature during the wash cycle, the washer will automatically add extra time to allow the
heater to bring the water up to the programmed, or target temperature. In this stage, the displayed time will pause and
hold until the heating operation has been completed. It is at this point that the customer may feel that operation has
stopped. (The maximum added programmed time is 30 minutes)
V # 3
V # 4
B L E A C H
M A I N ( C )
Stacking Kit :
Samsung washers and dryers can be stacked to maximize usable space.
An optional stacking kit is available for purchase from your Samsung retailer
Path #5
Bleach
Softener
DH 81-11 980A
DH 81-11 981A
DH 81-11 982A
DH 81-11 983A
DH 81-11 984A
SUPPORT INFORMATION
http://my.plus1solutions.net/clientPortals/samsung/
http://service.samsungportal.com/
Items Packed With Washer
BOLT-SPANER (10-13mm Wrench) DC60-40146A
V # 5
ASSY HOSE WATER DC97-15691A and DC97-15692A
MANUAL-BOOK DC68-02535A
S T E A M
CAP-FIXER DC67-00307A HOSE-HANGER DC62-10278A
(Model No : SK-5A/XAA)
NOTICE
When using non-HE
detergents, or using
too much detergent
for the water hard-
ness and soil level of
the clothing, over
sudsing will occur.
When this happens
there will be leaks out
of the detergent
drawer and door.
Please advise con-
sumer of proper de-
tergent usage.
Location considerations
Do not install your
washer in areas where
water may freeze, since
your washer will
always maintain some
water in its water valve,
pump, and hose areas.
This can cause
damage the belts, the
pump, hoses and other
components. Operating
temperature should be
above 60°F/16°C.
Advertisement
