Settings - Hisense HS643D60WUK User Manual

Settings

Press .
To open the dishwasher's settings menu, press and hold
Use to step through the menu.
Open the dishwasher's settings menu
Select alternative
To exit the menu, step through it or press
Settings
1 Automatic child
lock
2 Sounds
3 Rinse aid
4 Water hardness
18
.
Alternatives
00 (Off) You can activate the Automatic child lock setting to pre-
01 (On) vent children from starting the dishwasher.
To temporarily deactivate or activate the Automatic child
lock setting, press and hold
00 - 03 A beep confirms that the control panel has been pressed.
A beep indicates when a dishwashing program has
ended.
Error messages are always indicated by a loud buzzer.
00 - 05 Setting for rinse aid dosage. The rinse aid dispenser can
be adjusted between 00 (Off) and 05 (High dosage).
Increase the rinse aid dosage:
If the dishes have water marks.
Decrease the rinse aid dosage:
If the dishes have a sticky white/blue film.
If the dishes are streaked.
Build-up of foam. If you have very soft water, the
rinse aid can be diluted 50:50 with water.
Pre-selected at factory: 04
00 - 09 Adjusting the water softener. Select a setting depending
on the hardness of the water supply. It is important that
this setting is correct!
and until SEt is shown on the display.
Confirm / Next setting
for three seconds.