●
To remove flickering or blurring
Procedure
1. Choose "Analog Adjustment" in the "Screen" menu, and press
2. Choose "Phase" in the "Analog Adjustment" menu, and press
The "Phase" menu appears.
3. Adjust the phase with
4. Press
When vertical bars appear on the screen after adjustment, go back to "To eliminate vertical bars ".
(Clock → Phase → Position)
Attention
• Flickering or blurring may not be eliminated depending on your PC or graphics board.
●
To correct the screen position
Note
• Since the number of pixels and the pixel positions are fixed on the LCD monitor, only one position is
provided to display images correctly. The position adjustment is made to shift an image to the correct
position.
Procedure
1. Choose "Analog Adjustment" in the "Screen" menu, and press
2. Choose "Hor.Position" or "Ver.Position" from the "Analog Adjustment" menu, and press
The "Hor. Position" or "Ver. Position" menu appears.
3. Adjust the position with
4. Press
5. Close Pattern 1.
16
Chapter 2 Adjusting Screens
or
to minimize flickering or blurring.
to exit.
or .
to exit.
.
.
.
.