Functional Blocks - M-system R7L-DA16-R Instruction Manual

DEVICE INTERFACE FILE
Device Interface File (XIF) is used to define a L
For this module, the following file is used:
R7L-DA16v113.XIF
The XIF files are downloadable at M-System's web site: http://www.m-system.co.jp

FUNCTIONAL BLOCKS

■ NodeObject
• Network Variables
TYPE
NETWORK
{ Range }
VARIABLE
{ Default }
nviRequest {SNVT_obj_request}
nvoStatus {SNVT_obj_status}
nvoFileDirectory {SNVT_address}
nvoABNLCond {SNVT_state}
SEN TRONIC
W device when programmed on LonMaker.
ON ORKS
NodeObject (Object ID : 0)
Network Variables
nviRequest
nv 0
SNVT_obj_request
Configuration Properties
NodeObject :
SCPTdirection
SCPTmaxSendTime[ ]
SCPTminSendTime[ ]
SCPTlocation
SCPToemType
SCPTserialNumber
EXPLANATIONS
For use with LonMaker and other tools.
For use with LonMaker and other tools.
For use with LonMaker and other tools.
Required to get access to Configuration Properties.
Shows the device status (All 0s in normal conditions).
Bit 0 through Bit 9 : Invalid
Bit 10 : E PROM Configuration Property check sum error
2
Bit 11 : E PROM Count data check sum error
2
(Bit 10 and Bit 11 can be reset to 0 by RQ_CLEAR_STATUS against NodeObject.)
Bit 12 through Bit 15 : Invalid
056 222 38 18 mailbox@sentronic.com
AG
nvoStatus
nv 1
SNVT_obj_status
nvoFileDirectory
nv 2
SNVT_address
nvoABNLCond
nv 3
SNVT_state
Extension module setting
Maximum sending time (per fb)
Minimum sending time (per fb)
Set Tag No. (name)
Indicate Model No. and Version
Indicate Serial No.
www.sentronic.com
R7L-DA16
EM-7804-F Rev.10 P. 5 / 19