1. Manuals
  2. Brands
  3. AVYCON Manuals
  4. DVR
  5. AVR-NT504A
  6. User manual

AVYCON AVR-NT504A User Manual

Hide thumbs Also See for AVR-NT504A:
Table of Contents

Advertisement

Quick Links

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the AVR-NT504A and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for AVYCON AVR-NT504A

Summary of Contents for AVYCON AVR-NT504A

  • Page 2 Notes Please read this user manual carefully to ensure that you can use the device correctly and  safely. There may be several technically incorrect places or printing errors in this manual. The  updates will be added into the new version of this manual. The contents of this manual are subject to change without notice.

  • Page 3: Table Of Contents

    DVR User Manual Contents Contents Contents ..........................i Introduction......................1 1.1 Summary ........................1 1.2 Features ......................... 1 1.3 Front Panel Descriptions ....................4 1.4 Rear Panel Descriptions ....................5 1.5 Connections........................7 Basic Operation Guide .....................10 2.1 Startup & Shutdown ....................10 2.1.1 Startup ......................

  • Page 4: Contents

    DVR User Manual Contents 5.4.5 Image Adjustment .................... 37 PTZ ..........................40 6.1 PTZ Control Interface Introduction ................40 6.2 Preset Setting ......................43 6.3 Cruise Setting ......................44 6.4 PTZ Protocol Setting ....................46 Record & Disk Management ..................47 7.1 Record Configuration ....................
  • Page 5 DVR User Manual Contents 9.3.4 Intrusion Detection ................... 75 9.4 Exception Alarm ......................76 9.4.1 IPC Offline Settings ................... 76 9.4.2 Video Loss Settings ................... 77 9.4.3 Exception Handling Settings ................77 9.5 Alarm Event Notification ..................... 78 9.5.1 Alarm-out ......................78 9.5.2 E-mail........................
  • Page 6 DVR User Manual Contents 12.1 Mobile Client Surveillance ..................97 12.2 Web LAN Access ......................97 12.3 Web WAN Access....................... 98 12.4 Web Remote Control ....................99 12.4.1 Remote Preview ................... 100 12.4.2 Remote Playback ..................103 12.4.3 Remote Backup..................... 104 12.4.4 Remote Configuration ..................

  • Page 7: Introduction

    Introduction DVR User Manual 1 Introduction 1.1 Summary Based on the most advanced SOC technology and embedded system in the field, this series of the DVR adopt the new designed human interface and support the smart management of analog cameras and IP cameras and the record search of slice. This series of the DVR which are powerful and easy to use are provided with excellent image quality and stable system.
  • Page 8 Introduction DVR User Manual Support single camera image to be zoomed by sliding the scroll wheel of the mouse  Support any area of the image to be zoomed in to a maximum of 16 times of the current  size Support image and lens adjustment (only available for some cameras) ...
  • Page 9 Introduction DVR User Manual Support a maximum of 10 backup tasks in background and backup status viewing  Alarm Management Support alarm schedule setting  Support enabling or disabling of the motion detection, external sensor alarm input,  intelligence alarm and exception alarms including IP address conflict alarm, disk IO error alarm, disk full alarm, no disk alarm, illegal access alarm, network disconnection alarm, IPC offline alarm and so on, alarm trigger configuration supportable Support IPC offline alarm trigger configuration of PTZ, snap, pop-up video, etc.

  • Page 10: Front Panel Descriptions

    Introduction DVR User Manual Support factory restoring, import and export of the system configuration, log view and  export and local upgrading by USB mobile device Support auto recognition of the displayer’s resolution  You can click the right mouse button at any interface to go back to the upper interface ...

  • Page 11: Rear Panel Descriptions

    Introduction DVR User Manual Name Descriptions Direction Key Change direction Multi-Screen Switch Change the screen mode Enter Confirm selection To connect external USB device like USB mouse or USB flash 1.4 Rear Panel Descriptions Here we only take a part of real panels for example to introduce their interfaces and connections.
  • Page 12 Introduction DVR User Manual Name Descriptions CVBS CVBS video output; connect to monitor ALARM IN Alarm inputs for connecting sensors Ground AUDIO OUT Audio output; connect to sound box AUDIO IN Audio input ALARM OUT Relay output; connect to external alarms VIDEO IN 8 CH video inputs HDMI...

  • Page 13: Connections

    Introduction DVR User Manual Name Descriptions RS485 Connectors for keyboards or speed domes. A is TX+; B is TX- AUDIO IN Audio input AHD VIDEO IN 16 CH AHD video inputs HDMI Connect to monitor Connect to monitor Network port AUDIO OUT Audio output CVBS...
  • Page 14 Introduction DVR User Manual The alarm input is an open/closed relay. If the input is not an open/closed relay, please refer to the following connection diagram: Alarm Output: The way to connect alarm output device: Pull out the green terminal blocks and loosen the screws in the alarm-out port. Then insert the signal wires of the alarm output devices into the port of NO and COM separately.
  • Page 15 Introduction DVR User Manual keyboard. The way to connect speed dome to the DVR: Type 1: Disconnect pluggable block from the RS485 terminal block and then loosen the fixed screws from the pluggable block, insert signal cables into Y and Z port separately (Y is TX+; Z is TX-) and tighten the fixed screws.

  • Page 16: Basic Operation Guide

    Basic Operation Guide DVR User Manual 2 Basic Operation Guide 2.1 Startup & Shutdown Please make sure all the connections are done properly before you power on the unit. Proper startup and shutdown are crucial to expending the life of your device. 2.1.1 Startup ①...
  • Page 17 Basic Operation Guide DVR User Manual Button Function Switch off—to stop the device Power Button Record Button To start recording -/-- /0-9 Input number or choose camera Fn1 Button Unavailable temporarily Multi Button To choose multi screen display mode Next Button To switch the live image To go to sequence view mode Audio...

  • Page 18: Mouse Control

    Basic Operation Guide DVR User Manual Button Function Record manually Search To enter search mode MEUN To enter menu Exit To exit the current interface ENTER To confirm the choice or setup Direction button To move cursor in setup ZOOM To zoom in No function temporarily To control playback.

  • Page 19: Common Button Operation

    Basic Operation Guide DVR User Manual The system includes two input boxes. Refer to the above pictures. The left box is the number input box and the right box is the input box which provides inputs of numbers, letters and punctuation characters.

  • Page 20: Wizard & Main Interface

    Wizard & Main Interface DVR User Manual 3 Wizard & Main Interface 3.1 Startup Wizard The disk icons will be shown on the top of the startup interface. You can view the number and status of each disk quickly and conveniently through these icons ( : no disk; : unavailable disk;...
  • Page 21 Wizard & Main Interface DVR User Manual Enable pattern lock and click “Edit” to set the pattern lock. Click “Edit Security Question” to set questions and answers for password security of admin. If you forget the password, please refer to Q4 in Appendix A FAQ for details. Click “Next”...
  • Page 22 Wizard & Main Interface DVR User Manual ④ Add Camera. Click “Refresh” to refresh the list of online IP cameras which are in the same local network with DVR and then click to add the searched camera. Click “Add All” to add all the cameras in the list.
  • Page 23 Wizard & Main Interface DVR User Manual Click to edit the added camera as shown on the above right. Input the new camera name, IP address, port, username and the password of the camera. You can click “Test” to test the effectiveness of the input information.

  • Page 24: Main Interface

    Wizard & Main Interface DVR User Manual ⑦ QR-Code. Enable the NAT function in the interface or set it in the network configuration after exiting the wizard (please refer to 11.1.7 NAT Configuration for details). You can scan the QR-Code through mobile client which is installed in the mobile phone or PAD to log in the mobile client instantly.
  • Page 25 Wizard & Main Interface DVR User Manual Button Meaning Screen mode button. Dwell button (see 5.2.2 Quick Sequence View and 5.2.3 Scheme View In Sequence for details). Click it to enable OSD; click to disable OSD. Click to set the default playback time before starting instant playback (8.1 Instant Playback) or going to the playback interface for playback operations (8.2 Playback Interface Introduction);...

  • Page 26: Setup Panel

    Wizard & Main Interface DVR User Manual Icon / Button Meaning Click it to log out the system. Click it and then select “Logout”, “Reboot” or “Shutdown” in the popup window. 3.2.2 Setup Panel Click StartSettings to pop up the setup panel as shown below. The setup panel includes seven modules.

  • Page 27: Main Functions

    Wizard & Main Interface DVR User Manual up the window as shown below. Click the main menus on the top of the camera management interface to go to corresponding interfaces. Refer to the picture below. For instance, you can go to system setup interface by clicking “System”...
  • Page 28 Wizard & Main Interface DVR User Manual The module covers the functions such as TCP/IP, DDNS, Port, E-mail and Network Status and so on. Please see 11.1 Network Configuration for details. Account and Authority  The module covers the functions such as Account Management (see 10.1 Account Management for details) and Permission Management (see 10.3 Permission Management for details) and so on.

  • Page 29: Camera Management

    Camera Management DVR User Manual 4 Camera Management 4.1 Camera Signal Click StartSettingsCameraManage CameraCamera Signal to go to the interface as shown below. Some models may support analog signal switching to IP signal, which means decreasing (or increasing) the number of analog channels, accordingly increasing (or decreasing) the number of IP channels with the total channels unchanged.
  • Page 30 Camera Management DVR User Manual Quickly Add  Check the cameras and then click “Add” to add cameras. Click to edit the camera’s IP address, username and password and so on. Click “Default Password” to set the default username and password of each camera.

  • Page 31: Edit Camera

    Camera Management DVR User Manual Add Manually  Input the IP address or domain name (click in the IP address column to pop up the domain name input window, input the domain name of the IPC in the window and then click “OK”...

  • Page 32: Ip Planning

    Camera Management DVR User Manual 4.3 IP Planning Some models may not support this function. Click “IP Planning” to go to the interface as shown below. This function supports searching other DVRs/NVRs that is in the same local network as the local DVR. The user may add the IPC of other DVRs/NVRs into the unoccupied channels of the local DVR.

  • Page 33: Live Preview Introduction

    Live Preview Introduction DVR User Manual 5 Live Preview Introduction 5.1 Preview Interface Introduction The connected analog camera will be added automatically in the live preview interface for previewing. You should add IP camera manually for previewing (see 4.2.1 Add Camera for details).

  • Page 34: Preview Mode

    Live Preview Introduction DVR User Manual Button Menu List Meaning Zoom In Click it to go to single channel amplification interface. Click it to go to image adjustment interface. Refer to 5.3.5 Image Adjustment for details. Camera Info Click it to view the IP camera information. The single channel amplification interface is as shown below.

  • Page 35: Quick Sequence View

    Live Preview Introduction DVR User Manual Add Display Mode  Method One: ① Click “Customize Display Modes” in the above interface and then set the screen mode. ② Add the cameras and adjust the cameras’ display sequence as needed. ③ Click under the display mode list and then enter the display mode name in the popup window, click the “OK”...

  • Page 36: Scheme View In Sequence

    Live Preview Introduction DVR User Manual Go to the live preview interface and then click to pop up a little window. Set the dwell time in the window and then click to view the live group by group according to the camera number of the current screen mode.

  • Page 37: Spot View

    Live Preview Introduction DVR User Manual Add Scheme  Click in area ① to create a new scheme.0 Click on the top right corner of the scheme to delete it. Configure Scheme  Select a scheme in area ① and then click the screen mode button on the tool bar to set the screen mode of the scheme.

  • Page 38: Pos Settings

    Live Preview Introduction DVR User Manual window in the middle of the interface. After finishing the settings of all the schemes, select the dwell time and click “Apply” to start playing the schemes in sequence in output 2. 5.3 POS Settings Some models may not support this function.
  • Page 39 Live Preview Introduction DVR User Manual ⑤ Click “Display Position” under “Display Settings” to set the position of the POS information (Use the default settings of the general settings). ⑥ Check “Trigger Camera” and click configure under it to bind POS to the camera. One POS can be bound to multiple channels, but one channel can only be bound to one POS.

  • Page 40: Preview Image Configuration

    Live Preview Introduction DVR User Manual One POS is bound to multiple cameras: 5.4 Preview Image Configuration 5.4.1 OSD Settings Click StartSettingsCameraImageOSD Settings to go to the interface as shown below. Select the camera, input the camera name (or double click the camera name in the camera list...

  • Page 41: Image Settings

    Live Preview Introduction DVR User Manual to change the camera name), enable or disable the name and time OSDs (if enabled, drag the red name and time OSDs directly in the image view area to change the OSDs’ display position) and select the date and time formats.

  • Page 42: Mask Settings

    Live Preview Introduction DVR User Manual 5.4.3 Mask Settings Some areas of the image can be masked for privacy. Up to four mask areas can be set for each camera. Click StartSettingsCameraImageMask Settings to go to the interface as shown below. Select the camera and enable the mask. Click “Draw” button and then drag the mouse on the image area to set the mask area;...

  • Page 43: Image Adjustment

    Live Preview Introduction DVR User Manual Click “Apply” to save the settings. 5.4.5 Image Adjustment Go to live preview interface and then click button on the tool bar under the camera window to go to the image adjustment interface. Image Adjustment ...
  • Page 44 Live Preview Introduction DVR User Manual The introductions of these parameters are as follows: Parameter Meaning Brightness It is the brightness level of the camera’s image. Contrast It is the color difference between the brightest and darkest parts. Saturation It is the degree of color purity. The color is purer, the image is brighter. It refers to the total color degree of the image.
  • Page 45 Live Preview Introduction DVR User Manual Button/Parameter Meaning Click to zoom in/out the image. If manual mode is selected, focus button & “One Key Focus” & “Day/night Focus Mode mode switch autofocus” will be available; if auto mode is selected, the time interval setup will be available.

  • Page 46: Ptz

    DVR User Manual 6 PTZ 6.1 PTZ Control Interface Introduction You can control the dome or PTZ which connects to the camera for PTZ control. Click on the tool bar at the bottom of the live preview window to go to the PTZ control interface as shown below.
  • Page 47 DVR User Manual The analog joystick on the left side of the interface provides quick PTZ control. The dome or PTZ will rotate when you drag the analog joystick. The farther you drag the analog joystick from the middle of the image, the faster the dome or PTZ rotates. The dome or PTZ will stop rotating when you stop dragging the analog joystick.
  • Page 48 DVR User Manual Advanced 3D Control  Double click the left button of the mouse on any area of the camera image and then the image size will be doubled and centered on the clicked point. Press and hold the left button of the mouse on any area of the camera image to zoom in the image;...

  • Page 49: Preset Setting

    DVR User Manual Adjust the dome’s direction and then click “Save Position” to save the current preset position (you can also click another preset in the preset list and then save the preset position after adjusting the dome’s direction); click in the preset list to call the preset;...

  • Page 50: Cruise Setting

    DVR User Manual Add preset  Select camera and then click “Add” button to add preset; or click in the camera list on the right side of the interface to display the preset information of the dome and then click to add preset.
  • Page 51 DVR User Manual Add Cruise  Click in the camera list on the right side of the interface to display the cruise information of the dome and then click to add cruise. The operations of the “Add Cruise” window are similar to that of the PTZ control interface; please see 6.1 PTZ Control Interface Introduction for details.

  • Page 52: Ptz Protocol Setting

    DVR User Manual 6.4 PTZ Protocol Setting Click StartSettingsCameraPTZProtocol to go to the interface as shown below. You can enable or disable the PTZ and set the protocol, baud rate and address of the analog dome in the interface. Please make sure the analog speed dome camera is well connected to the DVR before you control it.

  • Page 53: Record & Disk Management

    Record & Disk Management DVR User Manual 7 Record & Disk Management 7.1 Record Configuration 7.1.1 Mode Configuration Please format the HDDs before recording (refer to 7.5 Disk Management for details). Click StartSettingsRecordMode Settings to go to the mode settings interface. You can set the record time under the “Manual Record Settings”...
  • Page 54 Record & Disk Management DVR User Manual enabled all the time; motion/sensor/intelligence alarm record will be enabled when motion/sensor/intelligence alarm happens. Always(24 7) Record+Motion Record+Sensor+Intelligence+POS Record: Normal record is ⅹ enabled all the time; motion/sensor/intelligence/POS alarm record will be enabled when motion/sensor/intelligence/POS alarm happens.

  • Page 55: Advanced Configuration

    Record & Disk Management DVR User Manual Video Encode: the video encode format of the camera. GOP: group of pictures. Resolution: the higher the resolution is, the clearer the image is. FPS: the higher the frame rate is, the more fluency the video is. However, more storage room will be taken up.

  • Page 56: Encode Parameters Setting

    Record & Disk Management DVR User Manual 7.2 Encode Parameters Setting Click StartSettingsRecordEncode Parameters to go to the interface as shown below. Set the encode, resolution, FPS, bitrate type, quality, max bitrate and audio of main stream for each camera in “Event Recording Settings” and “Schedule Recording Settings” interfaces. Click “Apply”...
  • Page 57 Record & Disk Management DVR User Manual to display the detailed schedule information on the left side of the interface. The seven rows stand for the seven days in a week and each row stands for 24 hours in a day. Blue stands for the selected time and gray stands for unselected time.
  • Page 58 Record & Disk Management DVR User Manual Set Day Schedule  Click and then drag the cursor on the time scale to set record time; click and then drag the cursor on the time scale to delete the selected area. You can manually set the record start time and end time.

  • Page 59: Record Schedule Configuration

    Record & Disk Management DVR User Manual Click “All” to set all week recording; click “Reverse” to swap the selected and unselected time in a week; click “Clear All” to clear all the selected area in a week. 7.3.2 Record Schedule Configuration Click StartSettingsRecordRecord ScheduleSchedule Configuration to go to the interface as shown below.

  • Page 60: Timing Recording

    Record & Disk Management DVR User Manual Note: Click Start Settings Record Mode Settings and then set the manual record time in the    interface. Click “Apply” to save the settings. 7.4.2 Timing Recording Timing Recording: the system will record automatically according to the schedule. Set the timing record schedule of each camera.

  • Page 61: Storage Mode Configuration

    Record & Disk Management DVR User Manual Note: 1. The new HDD should be formatted for normal use. 2. For normal use of the HDD which has been used in other DVR, if the DVR is of the same model with the new DVR, please import the configuration file of the DVR to the new DVR or format the HDD;...
  • Page 62 Record & Disk Management DVR User Manual...

  • Page 63: Playback & Backup

    Playback & Backup DVR User Manual 8 Playback & Backup 8.1 Instant Playback Click on the tool bar at the bottom of the preview camera window to play back the record (click on the tool bar at the bottom of the live preview interface to set the default playback time).
  • Page 64 Playback & Backup DVR User Manual The added cameras will playback their records in the playback interface automatically. You can also add the playback camera manually. Click in the playback window to pop up the “Add Camera” window. Check the cameras in the window and then click “Add” to add playback camera.
  • Page 65 Playback & Backup DVR User Manual Button Meaning Next frame button. It works only when the forward playing is paused in single screen mode. Click to step backward 30s and click to step forward 30s. Click it to show the water mark on the image; click to hide the water mark.

  • Page 66: Smart Playback

    Playback & Backup DVR User Manual Click it to add tag. You can play back the record by searching the Add Tag added tag. Click it and then input the tag name in the popup window. Click “Add” to add tag. Click it to switch the playback camera.
  • Page 67 Playback & Backup DVR User Manual Smart Playback by Drawing Rectangle  Click and draw a rectangle in the desired area. Then the system will automatically search the record files of this area. The cyan blocks indicate that there are intelligent recording files. Move the cursor to such block and click to play the record.

  • Page 68: Record Search, Playback & Backup

    Playback & Backup DVR User Manual Smart Playback by Drawing Quadrilateral  Click and draw a quadrangle in the desired area. Then the system will automatically search the record files of this area. The cyan blocks indicate that there are intelligent recording files.

  • Page 69: Search, Playback & Backup By Time-Sliced Image

    Playback & Backup DVR User Manual 8.4.1 Search, Playback & Backup by Time-sliced Image ① Click StartSearch and BackupBy Time-sliced Image to go to “By Time-sliced Image” tab. There are two view modes: by time and by camera. In the time view mode, a maximum of 64 camera thumbnails can be showed.
  • Page 70 Playback & Backup DVR User Manual Note: If you back up the record in private format, the system will back up a RPAS player to USB device automatically. The private format record can be played by RPAS player only. ⑤ Click the “Playback” button to play the record in the playback interface (refer to 8.2 Playback Interface Introduction for details).

  • Page 71: Smart Search

    Playback & Backup DVR User Manual to view the record of the last/next day; click “Minute” in the “Picture” option under the time scale to select “Minute” mode (in “Minute” mode, click the time scale to change the time of the 60 display windows) and click “Hour”...

  • Page 72: Search, Playback & Backup By Time

    Playback & Backup DVR User Manual 8.4.3 Search, Playback & Backup by Time ① Click StartSearch and BackupBy Time to go to “By Time” tab as shown below. Click on the bottom of the interface to add playback camera. Click “Modify” on the top right corner of the camera window to change the camera and click “Clear”...

  • Page 73: Search & Playback By Tag

    Playback & Backup DVR User Manual ② Check the event type in the interface as required. ③ Click to set the start time and end time on the top left of the interface. ④ Check cameras on the left side of the interface or check “All” to select all the cameras and then click to search the record.

  • Page 74: Image Management

    Playback & Backup DVR User Manual 8.4.6 Image Management Click StartSearch and BackupImage Management to go to “Image Management” tab. The system will display all the snapped images automatically in the list. Click to delete the image. Click to pop up the “Export” window. Select the device name and save path in the window and then click the “Save”...

  • Page 75: Alarm Management

    Alarm Management DVR User Manual 9 Alarm Management 9.1 Sensor Alarm To complete the entire sensor alarm settings, you should enable the sensor alarm of each camera and then set up the alarm handling of each camera. ① Click StartSettingsAlarmSensor Alarm to go to the following interface. ②...

  • Page 76: Motion Alarm

    Alarm Management DVR User Manual Configure the trigger alarm-out in the window. The system will trigger the alarm-out automatically when the sensor alarm is triggered. You need to set the delay time and the schedule of the alarm outputs. See 9.5.1 Alarm-out for details. Preset: check it and then the “Trigger Preset”...

  • Page 77: Motion Alarm Handling Configuration

    Alarm Management DVR User Manual ② Select the camera, enable the motion and set the sensitivity and duration of the camera. Sensitivity: the higher the value is, the more sensitive it is to motion. You should adjust the value according to the practical conditions since the sensitivity is influenced by color and time (day or night).
  • Page 78 Alarm Management DVR User Manual following interface. ② Select the camera, enable the object detection and set the duration and detect type. There are two detect types: Abandoned object and missing object. Abandoned object: Alarms will be triggered if there are articles left in the pre-defined detection area.

  • Page 79: Exception

    Alarm Management DVR User Manual and “E-mail”. The alarm handling setting of object detection alarm is similar to that of the sensor alarm (see 9.1 Sensor Alarm for details). ③ Click “Apply” to save the settings. You can click “Article Protect Config” to go to the object detection configuration interface.

  • Page 80: Line Crossing

    Alarm Management DVR User Manual and “E-mail”. The alarm handling setting of exception detection alarm is similar to that of the sensor alarm (see 9.1 Sensor Alarm for details). ③ Click “Apply” to save the settings. You can click “Exception Config” to go to the exception detection configuration interface.

  • Page 81: Intrusion Detection

    Alarm Management DVR User Manual ② Enable or disable “Snapshot”, “Push”, “Alarm-out”, “Preset”, “Buzzer”, “Pop-up Video” and “E-mail”. The alarm handling setting of line crossing alarm is similar to that of the sensor alarm (see 9.1 Sensor Alarm for details). ③...

  • Page 82: Exception Alarm

    Alarm Management DVR User Manual Intrusion Detection Alarm Handling Configuration: ① Click StartSettingsAlarmIntelligence AlarmIntrusion Detection to go to the following interface. ② Enable or disable “Snapshot”, “Push”, “Alarm-out”, “Preset”, “Buzzer”, “Pop-up Video” and “E-mail”. The alarm handling setting of intrusion detection alarm is similar to that of the sensor alarm (see 9.1 Sensor Alarm for details).

  • Page 83: Video Loss Settings

    Alarm Management DVR User Manual ② Enable or disable “Snapshot”, “Push”, “Alarm-out”, “Preset”, “Buzzer”, “Pop-up Video”, “Pop-up Message Box” and “E-mail”. The IPC Offline Settings are similar to that of the sensor alarm (see 9.1 Sensor Alarm for details). ③ Click “Apply” to save the settings. 9.4.2 Video Loss Settings ①...

  • Page 84: Alarm Event Notification

    Alarm Management DVR User Manual ③ Click “Apply” to save the settings. 9.5 Alarm Event Notification 9.5.1 Alarm-out ① Click StartSettingsAlarmEvent Notification to go to the following interface. ② Set the delay time and the schedule of each alarm-out. You can click “Edit Schedules” to edit the schedules (see 7.3.1 Add Schedule for details).

  • Page 85: Buzzer

    Alarm Management DVR User Manual 9.5.4 Buzzer Click StartSettingsAlarmEvent NotificationBuzzer to go to the buzzer configuration interface. Set the delay time of the buzzer and then click “Apply” to save the setting. You can click “Test” to test the buzzer. 9.5.5 Push Message Click StartSettingsAlarmEvent NotificationPush Message to go to the interface as shown below.

  • Page 86: View Alarm Status

    Alarm Management DVR User Manual 9.7 View Alarm Status Click StartSettingsAlarmAlarm Status or click on the tool bar at the bottom of the live preview interface to view the alarm status. Click the “Clear” button to stop the buzzer when the buzzer alarm happens. Click view the detail information as shown below.

  • Page 87: Account & Permission Management

    Account & Permission Management DVR User Manual 10 Account & Permission Management 10.1 Account Management Click StartSettingsAccount and AuthorityAccountEdit User to go to the interface as shown below. Area ① displays the user permissions. Area ② displays the user list. Click the user in the list to display its user permissions in area ①.

  • Page 88: Edit User

    Account & Permission Management DVR User Manual ② Set the username, password and group. The e-mail address and MAC address are optional (input the MAC address after you check it). Click “Add” to add the user. 10.1.2 Edit User Click StartSettingsAccount and AuthorityAccountEdit User and then click in the user list or double click the user to edit the user information.
  • Page 89 Account & Permission Management DVR User Manual Enter current password and then check “Enable” to input pattern lock. Recover Password  Click “Recover Password” to reset the password to 123456. Edit User  Click “Edit User” to pop up the window as shown below. The admin is enabled, its permission control is closed and permission group cannot be changed by default.

  • Page 90: User Login & Logout

    Account & Permission Management DVR User Manual 10.2 User Login & Logout Login: Click StartLogin or directly click the preview interface and then select username and enter the password in the popup window. Click the “Login” button to log in the system. Logout: Click StartLogout or click StartShutdown to pop up the “Shutdown”...

  • Page 91: Edit Permission Group

    Account & Permission Management DVR User Manual 10.3.2 Edit Permission Group Go to “Edit Permission Group” interface and then click in the group list to edit the permission group (the operations of the “Edit Permission Group” are similar to that of the “Add Permission Group”, please see 10.3.1 Add Permission Group for details).

  • Page 92: Preview On Logout

    Account & Permission Management DVR User Manual popup window (only if you check it can the IP/IP segment/MAC you add be effective). Enter the IP/IP segment/MAC and then click “OK”. In the above interface, click to edit IP/IP segment/MAC, click to delete it.

  • Page 93: Device Management

    Device Management DVR User Manual 11 Device Management 11.1 Network Configuration 11.1.1 TCP/IP Configuration Click StartSettingsNetworkTCP/IP to go to the following interface. Check “Obtain an IPv4 address automatically”, “Obtain an IPv6 address automatically” and “Obtain DNS automatically” to get the network addresses automatically, or manually input the network addresses.

  • Page 94: Pppoe Configuration

    Device Management DVR User Manual a web browser, you should input IP address plus HTTP port in the address bar like http://192.168.11.61:81. HTTPS Port: the default HTTP port of the DVR is 443. Server Port: the default server port of the DVR is 6036. The server port number can be changed as required.

  • Page 95: E-Mail Configuration

    Device Management DVR User Manual Check “Enable” and then select the DDNS type. Input the server address, domain name, username and password according to the selected DDNS type. Click “Test” to test the effectiveness of the input information. Click “Apply” to save the settings. You will have to input the server address and domain name if some DDNS types are selected.

  • Page 96: Upnp Configuration

    Device Management DVR User Manual Click “Edit Recipient” to go to the following interface. Click “Add” and then input the recipient’s e-mail address and select the schedule (if a schedule is selected, the system will send the alarm email and the recipient will receive it only in the selected schedule time) in the popup window.

  • Page 97: Nat Configuration

    Device Management DVR User Manual Click “Refresh” to refresh the UPnP status. If the UPnP status were still “Invalid UPnP” after refreshing it for many times, the port number would be wrong. Please change the mapping type to “Manual” and then click to modify the port until the UPnP status turns to “Valid UPnP”.

  • Page 98: View Network Status

    Device Management DVR User Manual 11.1.9 View Network Status Click StartSettingsNetworkNetwork Status to view the network status or click the tool bar at the bottom of the live preview interface to view network status conveniently. 11.2 Basic Configuration 11.2.1 Common Configuration Click StartSettingsSystemBasicGeneral Settings to go to the following interface.

  • Page 99: Date And Time Configuration

    Device Management DVR User Manual images automatically if it is not operated during the time you set. 11.2.2 Date and Time Configuration Click StartSettingsSystemBasicDate and Time to go to the interface as shown below. Set the system time, date format, time format and time zone of the DVR. The default time zone is GMT+08 Beijing, Hong Kong, Shanghai, Taipei.

  • Page 100: Backup And Restore

    Device Management DVR User Manual ① Copy the upgrade software (.tar) into the USB storage device. ② Insert the USB storage device into the USB interface of the DVR. ③ Click StartSettingsSystemMaintenanceUpgrade to go to “Upgrade” interface. Select the USB device in “Device Name” option and go to the path where the upgrade software exists.

  • Page 101: Restart Automatically

    Device Management DVR User Manual Insert the USB storage device into the USB interface of the DVR and then click StartSettingsSystemMaintenanceBackup and Restore to go to the interface. Backup  Select the USB device in “Device Name” option; go to the path where you want to store the configuration backup file and then click the “Backup”...

  • Page 102: View System Information

    Device Management DVR User Manual Choose the log file in the list and then click the “Export” button to export the log file. Click on the “Content” title bar to pop up a menu list. Check contents in the menu list and then the log list will show the checked log contents only.

  • Page 103: Remote Surveillance

    Remote Surveillance DVR User Manual 12 Remote Surveillance 12.1 Mobile Client Surveillance ① Enable NAT in the DVR. Refer to 11.1.7 NAT Configuration for details. ② Download and install the mobile client “AVY Mobile CVMS” into the mobile device with the Android or iOS system.

  • Page 104: Web Wan Access

    Remote Surveillance DVR User Manual Notes: 1. Please make sure that the IP address of the DVR and the computer are both in the same local network segment. For example, supposing that the IP address of the computer is 192.168.1.41, the IP address of the DVR shall be set to 192.168.1.XXX. 2.

  • Page 105: Web Remote Control

    Remote Surveillance DVR User Manual to see the serial number of the DVR), user name (the user name of the DVR, admin by default) and password (the password of the DVR, 123456 by default) of the DVR, select the display language on the top right corner of the interface and then click the “Login”...

  • Page 106: Remote Preview

    Remote Surveillance DVR User Manual admin: the current login username. Logout: click it to log out and return to the login interface. Modify Password: click it to change the password of the current login user. Input current password and then set a new password in the popup window. Click the “OK” button to save the new password.
  • Page 107 Remote Surveillance DVR User Manual Left Panel Introduction  Click on the left panel to hide the panel and click to show the panel. You can view all the added cameras and groups on the left panel. You can view the number of all the added cameras and the online cameras. For instance, the left number 3 in on the left panel stands for the number of online cameras;...
  • Page 108 Remote Surveillance DVR User Manual Click one camera window in the preview area and then click to set the camera’s live preview stream and record stream to main stream in manual record mode; click set the camera’s live preview stream and record stream to sub stream. In sub stream tab, set the resolution, FPS and bitrate and then click “Apply”...

  • Page 109: Remote Playback

    Remote Surveillance DVR User Manual PTZ panel introduction: Button Meaning Click rotate the dome; click to stop rotating the dome. Drag the slider to adjust the rotating speed of dome. Click to zoom in/out camera image. Click to increase/ decrease the focal length. Click to increase/decrease the iris of the dome.

  • Page 110: Remote Backup

    Remote Surveillance DVR User Manual Button Meaning View POS Backup start time button. Click the time scale and then click it to set the backup start time. Backup end time button. Click the time scale and then click it to set the backup end time. Backup button.

  • Page 111: Appendix Afaq

    DVR User Manual Appendix A FAQ Q1. Why can’t I find the HDD? Please check the power and SATA data cables of the HDD to make sure they are well connected. For some DVRs with the 1U or small 1U case, the power of the adapter may be not enough for operating them.
  • Page 112 DVR User Manual Q6. The system cannot record, why? Make sure the HDD was formatted prior to use. The record schedule has not been set in manual record mode. Please refer to 7.3.2 Record Schedule Configuration for details. Maybe HDD is full and thus the DVR is not able to record. Check HDD information from Disk Management and if required, please enable the recycle function (please see 7.1.2 Advanced Configuration for details).
  • Page 113 DVR User Manual ② Select SecurityCustom Level. Refer to Fig 8-1. ③ Enable all the sub options under “ActiveX controls and plug-ins”. Refer to Fig 8-2. ④ Then click “OK” to finish setup. Other plug-ins or anti-virus may block ActiveX. Please disable or do the required settings. Fig 8-1 Fig 8-2 Q9.
  • Page 114 DVR User Manual If you select the private format when backing up record by DVR, a RPAS compression  package will be backed up to the USB device automatically along with the record data. Uncompress the “RPAS.zip” and then click “RPAS.exe” to set up RPAS. After the setup is completed, open RPAS player and then click the “Open Folder”...
  • Page 115 DVR User Manual Fig 9-2...

  • Page 116: Appendix B Calculate Recording Capacity

    Calculate Recording Capacity DVR User Manual Appendix B Calculate Recording Capacity The recording capacity is mainly up to the record resolution, record stream and bitrate. Different image quality parameters decide different disk capacity occupation in equal times. The bigger the record resolution, record stream and record bitrate is, the more disk capacity is taken up in equal times.
  • Page 117 Calculate Recording Capacity DVR User Manual (49.45TB ÷ (1-10%)).

  • Page 118: Appendix C Compatible Device List

    Compatible Device List DVR User Manual Appendix C Compatible Device List Compatible HDD list Brand and Series Capacity Barracuda Series 500GB /1TB /2TB /3TB Seagate SV35 Series (recommended) 1TB /2TB /3TB Surveillance HDD Series (recommended) 1TB /2TB /3TB /4TB /6TB Blue Series 500GB /1TB Western Digital...

This manual is also suitable for:

Avr-ht816aAvr-ht532cAvr-ht516a-10tAvr-ht816a-3tAvr-ht532a-80t

Table of Contents