Beko DVN04321S User Manual page 14

Installation
Unpack the test
Open the tap and
strip.
let the water flow for
approx. 1 minute.
After the determination of the water hardness:
While the Program Selection Knob is "Off", press and hold the Start / Pause / Cancel key and
rotate the Program Selection Knob one step clockwise and keep the Start / Pause / Cancel
key pressed for 3 seconds; the machine shall switch to regeneration setting mode after this
period.
2. The regeneration level in the memory is illuminated for 5 seconds when you enter the
regeneration setting mode.
3. For setting a new Water Hardness Level, bring the Program Selection Knob to the proper
position for the hardness level of your mains water. (See Water Hardness Level Setting
Table)
4. Press the Start / Pause / Cancel key to record the selected setting in the memory.
5. Bring the Program selection knob to "Off" position.
1
2
5
3
4
Water hardness level setting table
Hardness English
Level Hardness °dE
0. Level
0-5
1. Level
6-9
2. Level
10-15
3. Level
16-19
4. Level
20-24
5. Level
25-62
14 /44 EN
Dip in the test strip
into the water for 1
second.
German French
Hardness °dH Hardness °dF
0-4 0-8
5-7 9-13
8-12 14-22
13-15 23-27
16-19 28-34
20-50 35-90
Take out the strip Wait for 1 minute.
from the water and
shake it.
Level of program
Water Hardness Level Indicator
selection knob *
1
The Washing light on the panel
illuminates.
1
The Drying light on the panel
2
illuminates.
The End light on the panel
3
illuminates.
The Washing, Drying and End lights
4
on the panel illuminate.
The Washing, Drying and End lights
5 on the panel flashes with intervals of
1 second.
Dishwasher / User's Manual
Make the necessary
adjustment
according to the test
strip.