Advertisement
aspenhome
ah
ITEM NO: I248-303-1/303-SLT-1
To dis-assemble desk (If necessary):
STEP 1:Remove the drawers from the pedestals: Fully extend the drawer, then press the plastic tab down on the right
and up on the left at the same time as shown below. While holding the tabs pressed down/up, pull the drawer out.
STEP 2:Remove bolts, lock washers and flat
washers from modesty panel (3 pcs), left
pedestal (4 pcs) and right pedestal (4 pcs)
connected to the desk top. Take the desk top off.
Left Pedestal
Notes: To reassemble desk, replace bolts removed in STEP 3 then STEP 2 above before
proceeding to STEP 4 below.
STEP 4: Replace all of the drawers in pedestals:
Fully extend the slides from the case. Then align the
slides on the drawer to the slides on the case as
shown. Push the drawer back in. You may have to
slide the drawer in and out several times in order to
properly align the ball bearings.
Page 2/2
66" Executive Desk
Modesty Panel
A
Right Pedestal
MADE IN VIETNAM
ASSEMBLY INSTRUCTIONS
R
Plastic Tab
Desk Top
Left Pedestal
STEP 3:Remove bolts, lock washers and flat
washers from modesty panel to left pedestal
(3 pcs) and right pedestal (3 pcs).
Modesty Panel
Right Pedestal
A
03-10-2022
Advertisement
