GeekChef GCF20B User Manual page 7

7. Place a large cup under the Filter Holder and press the Espresso Button.
8. After the cup has been filled with water, press the Espresso Button again to stop
and wait a few minutes for the machine to reach the correct temperature with the
filter holder inserted.
PREPARING THE ESPRESSO
1. Remove the filter holder and fill the filter with coffee grounds using the Measure
Scoop provided with the machine.
Note :
mend 14g) for each cup. The quantity will vary according to your
preferences.
Press the coffee into the filter with the Measure Scoop. The coffee must be pressed
2.
evenly to obtain a well levelled and flat surface. Remove any coffee residue from
the edge of the Filter holder.
3. Insert the Filter holder into the Brew unit with a 45°movement to the left and turn it
to the right to lock it in place. The Filter holder handle must be perpendicular to the
machine or slightly tilted towards the right.
4. Wait until the Temperatures ready indicator light turns blue.
MAKING THE ESPRESSO
1. Press the Espresso Button. The machine will start brewing.
2. Stop the brewing process when the cup is 3/4 full (about 60-80ML/2.0-2.8fl.oz) by
pressing the Espresso button. The coffee will be more or less intense depending on
the amount of water used and, if prepared following the correct procedure, it will
have the typical hazelnut / brown coloured "natural cream".
HOW TO USE
Add one measuring spoon of coffee grounds (we recom-
Ground Coffce
Filter
Ground Coffce
Filter
6
Ground Coffce
Filter