Table of Contents
Advertisement
3.
1.
Install batteries and turn on transmitter.
2.
On the transmitter, set the group and channel to match the receiver. The audio LED on the receiver should illu
minate.
If setting up additional systems, leave the first transmitter and receiver on. For each additional receiver, manual
ly set the group to match the first receiver. Note: The receiver will automatically perform a channel scan to find
an available frequency after the group has been selected. Set the transmitter frequency to match the receiver.
4.
If sound is too faint or distorted, adjust the gain accordingly.
Shure Incorporated
4/24
Advertisement
Table of Contents
