Creating A Volume In A 2-Bay Nsa; Creating A Raid 1 Volume - ZyXEL Communications NAS320 User Manual

Chapter 5 Tutorials
• Create shortcut has Windows make a desktop shortcut to this icon.
• Delete sends the shortcut to the recycle bin.
• Rename lets you change the name of the shortcut.
• Troubleshoot opens Windows' device troubleshooting wizard.
• Remove device removes the NSA from the Windows 7 Devices and Printers folder.
• Properties opens a window of details about the shortcut.

5.6 Creating a Volume in a 2-Bay NSA

This section shows you how to create a volume in your 2-bay NSA.
Creating a volume deletes all existing data in the hard disk. Make sure
you have a backup of your existing data before following the steps in this
section.
Your NSA has two bays for Serial Advanced Technology Attachment (SATA) hard disks. The JBOD
storage method is used if you are using a single hard disk for your NSA.
This JBOD volume shows up in the Storage > Volume screen
follows.

5.6.1 Creating a RAID 1 Volume

This storage method allows recovery of data if your hard disk fails. To create a RAID 1 volume, you
must install two SATA hard disks in your NSA. There are two ways to create a RAID 1 volume:
• Click the Migrate button - If you already have a SATA hard disk with a volume and you later
install a second SATA hard disk in your NSA, use the Migrate button to convert the existing JBOD
volume to a RAID 1 volume.
• Click the Create an internal volume button - Use this if there are no existing volumes in your
NSA.
72
(Section 8.3 on page 165) as
Media Server User's Guide