Optional Equipment Connections - Panasonic CT-27XF36C Operating Instructions Manual

I
NSTALLATION

Optional Equipment Connections

VCR Connection
Follow this diagram when connecting your television to a VCR only.
Note:
Viewing a television program
Procedure
Viewing a video
Procedure
r
r
Recording a television program
Procedure
r
r
4
CONNECTIONS ON BACK OF TV
AUDIO
L
R VIDEO
TO
AUDIO
AMP
R L
PROG OUT
CENTER CHANNEL
INPUT
CABLES NOT SUPPLIED
The remote control must be programmed with supplied codes to operate the VCR. See
Programming the Remote Control in the Remote Control Quick Reference Guide.
1. Select ANT1 in the SET UP menu under Prog Chan (Program Channels).
2. Tune the television to the television program you want to view.
Option A
1. Select ANT1 in the SET UP menu under Prog Chan.
2. Press the TV/VIDEO button on the remote control to select the video input (VIDEO 1,
VIDEO 2, etc.) connected to your VCR.
3. Begin the video.
Option B
1. Select ANT2 in the SET UP menu under Prog Chan.
2. Tune the television to Channel 3 or 4, depending on your VCR.
3. Begin the video.
Option A (Recording and viewing the same program)
1. Select ANT2 in the SET UP menu under Prog Chan.
2. Tune the television to Channel 3 or 4, depending on your VCR.
3. Using the VCR, tune to the television program you want to record.
4. Begin recording.
Option B (Recording one program while viewing another program)
1. Select ANT1 in the SET UP menu under Prog Chan.
2. Press the TV/VIDEO button on the remote control to select the video input (VIDEO 1,
VIDEO 2, etc.) connected to your VCR.
3. Using the VCR, tune to the television program you want to record.
4. Begin recording.
5. Press the TV/VIDEO button on the remote control to switch back to TV mode.
6. Tune the television to the television program you want to view.
Use either the
S-Video or Video
connection.
S-VIDEO
INPUT 1
INPUT 2
INPUT 3
ANT 1 SPLIT OUT
VCR
S-VIDEO OUT
ANT INPUT
VIDEO OUT
L
OUTPUT
AUDIO OUT
R
ANT 2
Incoming Cable