Optional Equipment Connections; Vcr Connection; Front Control Panel; Cable Box Connection - Panasonic CT-20SL15 Operating Instructions Manual

OPTIONAL EQUIPMENT CONNECTIONS
Optional Equipment Connections
Note: The remote control must be programmed with suppfied
codes to operate the optional equipment.
VCR Connection
VCRs, video disc players, video game equipment, and DSS
equipment can also be connected to the video inputs.
See the optional equipment manual for more information.
TERMINALS ON BACK OF TELEVISION FOR CT-20SL15
/
Use e_ther the B-V_deo or
V_deo Connection
CABLES NOT INCLUDED
Procedure
,, Connect equipment as shown to front or rear Audio/
Video input jacks.
,, Select the Video mode by pressing TV/VIDEO button.
,, Operate optional equipment as instructed in equipment
manual.
Note: When the S-video cable and the video cable are con-
nected to each jack at the same time, the S-video cable
takes precedence over the video cable.
Front Control Panel
The front control panel can be used to access menus
and switch video mode when the remote control is not
available.
Front panel for CT-20SL15
POWE_
O
POWER ON/OFF
Front panel for CT-27SC15/CT-27SL15
Procedure
,, Connect equipment to front Audio/Video input jacks.
,, Press TV/VlDEO button to select desired input mode.
,, Operate optional equipment as instructed in equipment
manual.
Cable Box Connection
Follow this diagram when connecting your television to a
Cable Box.
CABLE BOX
TERMINALS ON BACK OF TELEVISION FOR CT-2OSL15
CABLES NOT INCLUDED
Procedure
,, Tune the television to channel 3 or 4 depending on the
RF out setting of the cable box.
,, Using the cable box, tune to the premium cable chan-
nel you want to view.
Digital TV - Set=Top Box (DTV-STB) or DVD
Player Connection
Use this diagram to connect the Panasonic DTV-STB
(Digital TV-Set-Top Box) to the back of your TV.
_L CABLES NOT SUPPLIED COMPONENT VIDEO INPUT
TERMINALS ON BACK OF TV
FOR CT-20SL15
TERMINALS ON BACK OF
DTV-STB OR DVD PLAYER
DIGITAL TV OUTPUT
Y--PB-- pR
Notes:
e
There are three video jacks, Y, PB, and PR.
Separate component color inputs provide luminance
and color separation. Use the L (left) and R (right) au-
dio inputs.
Select DTV-STB to 480i output mode. TV set can
receive 480i signal only. Picture distortion will result if
any other type of format is selected (i.e. 480p, 720p or
1080i).
Only one Audio input is available on rear AV jack panel.
If using component Y,Pb,Pr video and L&R audio jacks,
then composite video input (yellow RCA jack) can not
have audio connected.
6