Panasonic CT-27XF36C Operating Instructions Manual page 8

I
NSTALLATION
VCR and Cable Box Connection
Follow this diagram when connecting your television to both a VCR and a cable box.
Note:
Viewing a premium (scrambled) cable channel
Procedure
Note:
Recording a premium (scrambled) cable channel
Procedure
Note:
6
CABLES NOT SUPPLIED
CONNECTIONS ON BACK OF TV
AUDIO
R L VIDEO
TO
AUDIO
AMP
R L
PROG OUT
CENTER CHANNEL
INPUT
The remote control must be programmed with supplied codes to operate the VCR and
the cable box. See Programming the Remote Control in the Remote Control Quick
Reference Guide.
1. Select ANT2 in the SET UP menu under Prog Chan (Program Channels).
2. Tune the television to Channel 3.
3. Using the cable box, tune to the premium (scrambled) cable channel you want to view.
To use special features such as Favorite Channels and Channel Captions (see
Special Features section for more information), ANT1 must be selected in the SET UP
menu under Prog Chan.
1. Select ANT2 in the SET UP menu under Prog Chan.
2. Press the TV/VIDEO button on the remote control to select the video input (VIDEO 1,
VIDEO 2, etc.) connected to your VCR.
3. Turn the VCR ON.
4. Tune the VCR to Channel 3 or 4, depending on the switch setting on the back of VCR.
5. Using your cable box, tune to the premium (scrambled) cable channel you want to
record.
6. Begin recording.
To view a different channel while recording:
• Select ANT1 in the SET UP menu under Prog Chan.
• Press the TV/VIDEO button on the remote control to TV mode.
• Tune the television to a television program (except another premium (scrambled)
cable channel).
S-VIDEO OUT
VIDEO OUT
AUDIO OUT
S-VIDEO
INPUT 1
Use either
INPUT 2
S-Video or Video
connection.
INPUT 3
ANT 1 SPLIT OUT ANT 2
VCR
CABLE BOX
ANT OUTPUT
ANT INPUT
ANT INPUT
L
OUTPUT
R
the
Incoming Cable