Sinclair SDV5 C1A Series Installation Manual page 6

Full dc inverter systems
Table of Contents

Advertisement

Panle installation bolt: M4X22
Panel component installation
(take 18-36 as an example, operation method of 45-71 are the
same.)
Remove the air return grille, filter screen, screw hidden cover.
As the grille switch arrow indication direction to pull the lock
catch, remove the air return grille.
Pull the buckle as figure display, remove the filter screen.
Open the air leading bar, remove three screw hidden covers.
Take down the air return grille, filter screen, screw hidden cover
and please safely keep them, do not lose, dirt and damage them.
Open the air leading bar, remove three
screw hidden covers. Pay attention to the
filter screen and the screw hidden cover.
installation manual
4
Install the panel component, and wiring
(take 18-36 as an example, operation method of 45-71 are the
same.)
Two buckles on the panel component are used for assisting the
panel installation, the installing method of the buckle as Fig.5.10
display.
Panel component wiring: open the electric control panel,
connect the wiring terminal of the control display box and the
motor connecting terminal of the air leading bar as the figure
display to the main control panel.
After
Fig.5-8
Panel control/
display box
wire
Fig.5-9
10-core cable plug on the panel connects to CN15 of the main control board
2 wires on the panel pass into the electric control box through this opening
After the baffle is removed ,the baffle is discarded.
Wind deflector motor wire cable plug connects
to the CN21 of the main control panel
Motor wire should goes through this
gap to enter the electric control box
Control box wire cable plug connects to the CN15 of the main control panel
Control box wire should goes through this gap to enter the electric control box
5-core cable plug on the panel connects to CN21 of the main control board
Fig.5-12 (45-71 model)
First
Fig.5-10
Panle wind
deflector
motor wire
Fig.5-11 (18-36 model)
Please use wire clamp to fix the cable,
otherwise it will result in short circuit
caused by wire looseness

Advertisement

Table of Contents
loading

Table of Contents