JVC GZ-HM200BEK Instructions Manual page 5

Date/Time Setting
Q
Open the LCD monitor to
turn on the camcorder
LCD monitor
R
Select [YES] within
10 seconds
Slide your finger up and down on the
sensor. Then touch OK.
SET
•
When the message disappears,
press the power button for at
least 2 seconds to turn off the
power, and then press it again
for at least 2 seconds.
•
Touch the sensors with your
finger. The sensors do not
function if you touch them with
your finger nail or with gloves on.
S
Select [CLOCK SETTING]
CLOCK ADJUST
CLOCK SETTING
AREA SETTING
SET FOR DAYLIGHT SAVING TIME
SET THE CITY, DATE AND TIME
SET
Power Button
( )
SET DATE/TIME!
YES
NO
QUIT
T
Select the city closest to
the area where you use
the camcorder
U
Select [ON] or [OFF]
Select [ON] if daylight saving time is
effective.
ON: Clock is advanced 1 hour from the
normal time which you set.
OFF: Deactivates the function.
V
Set the date and time
Touch sensor: Sets the date and
time.
}
: Moves the cursor to the right.
OK: Clock starts.
CLOCK SETTING
AREA SETTING
SET
QUIT
SET FOR DAYLIGHT SAVING TIME
DAYLIGHT SAVING TIME (DST)
OFF
SET DAYLIGHT SAVING TIME
SET QUIT
DATE TIME
1 11 2009 08 54 PM
GMT+9:00
SAVE QUIT