Table of Contents
Advertisement
MENU SETTINGS
Changing the Menu Settings
1
Touch MENU.
2
Select the desired menu.
FURTHER INFORMATION
Troubleshooting
Before requesting service, consult the
following chart. If the solutions indicated in the
chart do not solve the problem, consult your
nearest JVC dealer or JVC service center for
instructions.
Refer also to the FAQ of new products on
JVC's website.
Trouble
Cannot insert the SD
card.
No power is supplied.
Recording cannot be
performed.
Recording stops by
itself.
Vertical lines appear on
recorded images.
VIDEO
REGISTER EVENT
VIDEO QUALITY
ZOOM
DIS
ON
IMAGE BLURRED NEED TO
SET
QUIT
•
Check that the SD card is facing the right direction.
•
Connect the AC adapter correctly.
•
Recharge the battery.
•
SD card is full. Delete unnecessary files or replace the SD card.
•
Insert a commercially available SD card, and set each of the
[VIDEO SLOT SELECTION] and [IMAGE SLOT SELECTION] to
[SLOT A] or [SLOT B].
•
Recording stops automatically after 12 hours of non-stop
recording. To ensure continuous recording, set [AUTO SWITCH
REC MEDIA] to [ON] before you start recording.
•
Such a phenomenon occurs when shooting a subject
illuminated by bright light. This is not a malfunction.
3
Select the desired setting.
To return to the previous screen
@
Select
.
To quit the screen
Select [QUIT].
The following phenomena are not
malfunctions.
•
The camcorder heats up when it is used for
a long time.
•
The battery heats up during charging.
•
When playing back a video, the image stops
momentarily or the sound is interrupted at
junctions between scenes.
•
LCD monitor momentarily become red or
black when sunlight is recorded.
•
Black spots, or red, green, or blue spots
appear on the LCD monitor.
(The LCD monitor contains 99.99% effective
pixels, but 0.01% of fewer pixels may be
ineffective.)
Action
VIDEO
REGISTER EVENT
REGISTER EVENT
OFF
VIDEO QUALITY
VIDEO QUALITY
ON
ZOOM
ZOOM
DIS
DIS
ON
ON
IMAGE BLURRED NEED TO
IMAGE BLURRED NEED TO
QUIT
SET
Advertisement
Table of Contents
