Advertisement
R
Stand Alone Smoke Alarms
Thank you for selecting our product LX-SO-98A-D
LX-SO-98A-D Smoke Alarm User' s Manual
LX98 are photoelectric smoke alarms, they are
generally more effective at detecting smoldering fires
which smolder for hours before bursting into flame.
Sources of these fires may include cigarettes burning in
couches or bedding. LX98 accords with the ISO/DIS
12239 Standard.
IMPORTANT! PLEASE READ CAREFULLY AND KEEP
IT.
This user' s manual contains important information
about your smoke alarm' s operation. To insure your
safety, you need install one alarm at least in your every
single room. Please don' t open the smoke alarm for that
may cause improper effect.If you are installing this smoke
alarm for use by others, you must leave this manual – or
a copy of it—with the end user.
TECHNICAL PARAMETER
DC power: Power:DC9V
Static Current: <10uA
Alarm Current:<12mA
Low Voltage Alarm: 6.5V~7.5V
AC power: Power: 110V
Current:<25 mA
Alarm sonority:> 85 db (3m)
Working temperature:-10 ~50
WHERE TO INSTALL SMOKE ALARMS
1. At first, you need install them in your bedroom and routeway, and should install one
item in every bedroom at least.
2. Stairway is important for you to rush out when fires occur, so there must install smoke
detectors.
3. You at least require one smoke alarm on every floor,including finished attics and
basements.
4. Install one alarm beside every electric facility.
5. Install smoke alarms in the middle of ceiling,because smog,heat and flashes always
lift to the top of rooms
6. If some reasons cause you can' t install them in the middle of ceiling,you need to install
them at least 10cm away from the wall.
7. If you like to install them on the wall, they should be installed 10-30.5cm away under
the ceiling. Diagram 1.
8. You need install more than one alarm when the length of your hall exceeds 9m.
9. In an ablique roof room,install the alarm 0.9m away from the top.Diagram 2.
220V
℃
LX-SO-98A-D
40.00
22mm
www.lexing.com.cn
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Lexing LX-SO-98A-D
Summary of Contents for Lexing LX-SO-98A-D
- Page 1 Stand Alone Smoke Alarms LX-SO-98A-D Thank you for selecting our product LX-SO-98A-D LX-SO-98A-D Smoke Alarm User’ s Manual LX98 are photoelectric smoke alarms, they are generally more effective at detecting smoldering fires which smolder for hours before bursting into flame.
- Page 2 Stand Alone Smoke Alarms LX-SO-98A-D 10CM(4'') MINIMUM CEILING ANYWGERE IN THIS AREA BEST HERE NEVER HERE ACCEPTABLE HERE 0.9M(3ft) 0.9M(3ft) DIAGRAM 1 HORIZONTAL DISTANCE FROM PEAK SIDE WALL DIAGRAM 2 10. How to install smoke alarms in a removable house.The removable house is short of heat isolation, so you’...
- Page 3 Stand Alone Smoke Alarms LX-SO-98A-D HOW TO INSTALL THIS SMOKE ALARM Tools you will need: *Pencil *Drill with 6.5mm drill bit *Standard/Flathead screwdriver *Hammer 1. Hold base firmly and push the hinge in then turn anti-clockwise,so release the base down.
- Page 4 4. Cover your nose and mouth with a cloth (preferably wet). Take short, shallow breath. 5. Meet at your planned place outside your home, and do a head count to ensure everybody go out safely. ISO9001 NINGBO LEXING INDUCTOR ELECTRONIC CO.,LTD Add:No.35 Zhuquan Road,Science&Technology Area. E-mail:lexing@lexing.com.cn ISO14001 Ninghai,Ningbo,Zhejiang,China E-mail:lexing@globalmarket.com...
Need help?
Do you have a question about the LX-SO-98A-D and is the answer not in the manual?
Questions and answers