Advertisement
R
Stand Alone Smoke Alarms
Thank you for selecting our product LX-SI-918
The smoke alarm adopts ionic detector, the flame and heat are not
detected, they are generally more effective at detecting fast-flaming
fires which consume combustible materials rapidly and spread quickly.
Sources of these fires may be paper burning in a wastebasket,
or a grease fire in the kitchen.
IMPORTANT! PLEASE READ CAREFULLY AND SAVE IT.
user' s manual contains im p ortant information about your smoke
alarm' s operation. To insure your safety, you need install one alarm at
least in your every single room. Please don' t open the smoke alarm
for that may cause improper effect.
SPECIFICATION
Power source:DC9V
Static Current: <10uA
Alarm Current: 10~20mA
WHERE TO INSTALL SMOKE ALARMS
1.
At first, you need install them in your bedroom and routeway, and
should install one item in every bedroom at least.
2.
Stairway is important for you to rush out when fires occur, so there
must install smoke detectors.
3.
You at least require one smoke alarm on every floor,including finished
attics and basements.
4.
Install one alarm beside every electric facility.
5.
Install smoke alarms in the middle of ceiling,because smog,heat and flashes always lift to the top of rooms
6.
If some reasons cause you can' t install them in the middle of ceiling,you need to install them at least 10cm away
from the wall.
7.
If you like to install them on the wall, they should be installed 10-30.5cm away under the ceiling. Diagram 1.
CEILING
BEST HERE
NEVER HERE
ACCEPTABLE HERE
DIAGRAM 1
8.
You need install more than one alarm when the length of your hall exceeds 9m.
9.
In an ablique roof room,install the alarm 0.9m away from the top.Diagram 2.
10. How to install smoke alarms in a removable house.The removable house is short of heat isolation,so you' d better
install the alarm 10-30.5cm away from the ceiling.for safety you need install another one near your bedroom,too;
WHERE NOT TO INSTALL SMOKE ALARMS
1.
Where combustion particles are produced. Combustion particles form when something burns. Avoid installing in
LX-SI- 918 Smoke Alarm Manual
Alarm sonority:> 85 db (3m)
Low Voltage Alarm: 7V+0.5V
Working temperature:-10 ~50
10CM(4'')
MINIMUM
SIDE WALL
This
℃
0.9M(3ft)
HORIZONTAL DISTANCE
FROM PEAK
DIAGRAM 2
NO:LX-SI-918
ANYWGERE
IN THIS AREA
0.9M(3ft)
www.lexing.com.cn
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Lexing LX-SI-918
Summary of Contents for Lexing LX-SI-918
- Page 1 Stand Alone Smoke Alarms NO:LX-SI-918 Thank you for selecting our product LX-SI-918 LX-SI- 918 Smoke Alarm Manual The smoke alarm adopts ionic detector, the flame and heat are not detected, they are generally more effective at detecting fast-flaming fires which consume combustible materials rapidly and spread quickly.
- Page 2 Stand Alone Smoke Alarms NO:LX-SI-918 the areas include poorly ventilated kitchens,garages,and furnace rooms.Keep units at least 6m from the sources of combustion particles(stove,furnace,water heater,space heater)if possible.Ventilate these areas as much as possible. In air streams near kitchens.Air currents can draw cooking smoke into the sensing chamber of a smoke alarm n ear the kitchen.
- Page 3 Stand Alone Smoke Alarms NO:LX-SI-918 slide the base make the screw end up in the narrow end of the mounting slot, then tighten the screws; fix a 9V battery according to the correct polarity. close the smoke alarm. TEST Press and hold the test button on the cover, the smoke alarm should sound. The alarm sound should be loud and pulsating, that indicates the smoke alarm is operating correctly.
- Page 4 Cover your nose and mouth with a cloth (preferably wet). Take short, shallow breath. Meet at your planned place outside your home, and do a head count to ensure everybody go out safely. ISO9001 NINGBO LEXING INDUCTOR ELECTRONIC CO.,LTD Add:No.35 Zhuquan Road,Science&Technology Area. E-mail:lexing@lexing.com.cn...
Need help?
Do you have a question about the LX-SI-918 and is the answer not in the manual?
Questions and answers