Before Use; Read First; To Prevent Damage And Faults; Standard Accessories - Panasonic Lumix DMC-TZ50 Operating Instructions Manual

Before use

Read first

Do a test shot first!
Check first to see if you can take pictures
and record sounds (motion pictures/
pictures with audio) successfully.
We will not compensate for failed/
lost recording or for direct/indirect
damage.
Panasonic will not provide compensation
even if damage is caused by faults with
camera or card.
Certain pictures cannot be played
back
• Pictures edited on a computer
• Pictures taken or edited on a different
camera
(Pictures taken or edited on this camera
may also not be able to be played back
on other cameras)
Software on the supplied CD-ROM
The following actions are prohibited:
• Making duplicates (copying) for sale or
rent
• Copying onto networks
LCD monitor characteristics
Extremely high precision technology is employed to produce the
LCD monitor screen. However there may be some dark or bright
spots (red, blue or green) on the screen. This is not a malfunction.
The LCD monitor screen has more than 99.99% effective pixels
with a mere 0.01% of the pixels inactive or always lit. The spots
will not be recorded on pictures on the built-in memory or a card.
Unit temperature
The camera may become warm during use. (Especially grip
area, etc.)
This will not cause a problem with the performance or quality of
the camera.
12
VQT1U22

To prevent damage and faults

Avoid shocks, vibration, and
pressure
• Avoid exposing the camera to strong
vibration or shock; e.g. dropping or
hitting the camera, or sitting down with
the camera in your pocket.
(Attach strap to avoid dropping camera)
• Do not press the lens or the LCD monitor.
Do not get the camera wet or insert
foreign objects
• Do not expose the camera to water, rain,
or seawater.
(If camera gets wet, wipe with a soft,
dry cloth. Wring cloth thoroughly first if
wet with seawater, etc.)
• Avoid exposing lens and socket to dust
or sand, and do not allow liquids to leak
into gaps around buttons.
Avoid condensation caused by
sudden changes in temperature and
humidity
• When moving between places of
different temperature or humidity, place
camera into a plastic bag and allow to
adjust to conditions before use.
• If the lens clouds up, switch off the
power and leave for about two hours to
allow camera to adjust to conditions.
• If the LCD monitor clouds up, wipe with
a soft, dry cloth.
Grip area
Lens
• If lens is dirty:
Images may appear slightly white if lens is
dirty (fingerprints, etc.).
Turn the power on, hold the extracted lens
barrel with your fingers, and gently wipe
the lens surface with a soft, dry cloth.
• Do not leave in direct sunlight.
Camera ON/OFF switch
Do not touch the lens
barrier, as this may
damage lens. Be
careful when removing
camera from bag, etc.
When using tripod
• Do not apply excessive force or tighten
screws at an angle (may damage
camera, screw hole, or label.)
• Ensure that the tripod is stable.
(Read the tripod's instruction manual.)
When transporting
Switch off power.
We recommend using a genuine leather
case (DMW-CT3, sold separately).
Please also refer to 'Usage cautions and
notes' (P.98).
Standard
Accessories
Part numbers are as of April 2008
Battery Pack
CGA-S007A
(referred to in this manual as 'battery')
Battery Charger
DE-A45B
(referred to in this manual as 'charger')
Battery Carrying
Case
VYQ3680
Strap
VFC4297
USB Connection
Cable
K1HA08CD0019
AV Cable
K1HA08CD0020
CD-ROM
Please dispose of all packaging
appropriately.
Optional accessories (P.104)
• Cards are optional. You can record
or play back pictures on the built-in
memory when you are not using a card.
(P.18)
• If any accessories have been lost,
customers in the USA should contact
Panasonic's parts department at 1 800
833-9626 for further information about
obtaining replacement parts.
VQT1U22
13