Panasonic Lumix DMC-TZ50 Operating Instructions Manual page 41

4
Using PLAYBACK menu
Applications
(View)
(Continued)
Copy between built-in memory and memory card, or from memory card to clipboard folder.
Set-up: Press 'MENU/SET' → '
Select copy method (direction)
1
PLAYBACK
PROTECT
AUDIO DUB.
COPY
SELECT SET
Select picture with ◄► and set (for
2
3 Select 'YES'
• To cancel → Press 'MENU/SET'
COPY
• Press
COPY PICTURES FROM
BUILT-IN MEMORY TO
MEMORY CARD ?
YES
NO
CANCEL SELECT SET
If there is not enough space on the built-in memory for copying to be performed, turn
off the power, remove the card, and delete pictures from the built-in memory (to delete
clipboard pictures, set the mode dial to clipboard mode).
To copy to a card, use a card with a capacity of at least 50 MB.
Copying pictures may take several minutes. Do not turn off power or perform other
operations during copying.
If identical names (folder/file numbers) are present in the copy destination, a new
folder for copying will be created when copying from built-in memory to card (
Identically-named files will not be copied from card to built-in memory (
DPOF settings will not be copied.
Only pictures from Panasonic digital cameras may be copied.
Original pictures will not be deleted after copying (to delete pictures → P.36).
Cannot be set in 'CATEGORY PLAY' or 'FAVORITE PLAY' playback mode (P.71).
80 80
VQT1U22 VQT1U22
COPY
PLAYBACK menu' → Select 'COPY' (P.20)
: Copy all pictures from built-in memory to card
3
(go to step )
(Clipboard pictures cannot be copied. Use
'COPY' in the clipboard menu (P.65).)
: Copy 1 picture at a time from card to built-in
memory.
: Copy 1 picture at a time from card to clipboard
folder (in built-in memory) (not motion pictures).
and )
when settings complete to return to the
menu screen
(Screen shown is example)
Connecting 1
with other
devices
Connect the camera to your computer to save, play,
print, and e-mail your pictures.
Set-up:
• Connect the camera to the AC adaptor (DMW-
AC5PP, sold separately). (Alternatively, use a
sufficiently-charged battery.)
• Card
Built-in memory
Hold here
(Push until it is fully
inserted.)
ACCESS
(sending data)
• Do not disconnect the USB
connection cable while
'ACCESS' is displayed.
If using AC adaptor, turn
off camera power before
plugging in or removing.
To cancel connection
).
).
Do not use any other USB connection cables except the supplied one.
Turn off power before inserting or removing memory cards.
If using Windows 98/98SE, install USB driver software when connecting for first time.
When the battery begins to run out during communication, the status indicator flashes
and a warning beep sounds. Cancel communication via your computer immediately
(recharge the battery before reconnecting).
Setting the 'USB MODE' (P.26) to 'PC' eliminates the need to make the settings each
time the camera is connected to the computer.
For more details, consult your computer operating manual.
Using with your PC
1
2
3
: Insert card and set mode dial to
any except or .
: Remove card and set mode dial
4
to any except .
Check socket direction
and insert straight in.
(Damage to socket
shape can lead to
faulty operation.)
5
USB connection cable
• always use cable
supplied
Click 'Safely Remove Hardware' in the Windows
System Tray → disconnect USB connection cable →
turn off camera power → disconnect AC adaptor
Turn on power of
both camera and
computer
Set REC/PLAY
switch to
Connect camera to
computer
Select 'PC' on the
camera
USB MODE
PLEASE SELECT
THE USB MODE
PictBridge(PTP)
PC
SELECT
SET
(A message may be displayed
on screen if 'USB MODE' (P.26)
is set to 'PictBridge (PTP)'.
Select 'CANCEL' to close the
screen, and set 'USB MODE'
to 'PC'.)
Operate with your
computer
(see next page)
81 81
VQT1U22 VQT1U22