Table of Contents
Advertisement
System Event Log
Allows you to change the SEL event log configuration.
•
The following items appears only when you set SEL Components to [Enabled].
•
All values changed here do not take effect until computer is restarted.
SEL Components [Enabled]
Allows you to enable or disable all features of system Event Logging during boot.
Configuration options: [Disabled] [Enabled]
Erase SEL [No]
Allows you to choose options for erasing SEL.
Configuration options: [No] [Yes, On next reset] [Yes, On every reset]
When SEL is Full [Do Nothing]
Allows you to choose options for reactions to a full SEL.
Configuration options: [Do Nothing] [Erase Immediately]
Log EFI Status Codes [Error code]
Disable the logging of EFI Status Codes, or log only error code, or only progress code,
or both.
Configuration options: [Disabled] [Both] [Error code] [Progress code]
BMC network configuration
The sub-items in this configuration allow you to configure the BMC network parameters.
ASUS P10S-E/4L
4-47
Advertisement
Table of Contents
