Message Displays - Panasonic Lumix DMC-LS5 Operating Instructions Manual

Message displays

Meanings and required responses to major messages displayed on LCD monitor.
[Some pictures cannot be deleted]
●
Non-DCF pictures (→20) cannot be deleted.
→ Save needed data on a computer or other device, and then use [Format] on the
camera. (→28)
[No additional selections can be made]
●
The number of pictures that can be deleted at once has exceeded.
●
The number of pictures allowing [Resize] (multiple settings) at once has exceeded.
[Please turn camera off and then on again]
●
The lens is not working correctly.
→ Turn on power again.
(Consult the dealer or your nearest Service Centre if display still remains)
[Some pictures cannot be copied]
●
Pictures cannot be copied in the following cases:
→ Picture of same name already exists in built-in memory when copying from card.
→ File is not of DCF standard.
→ Picture taken or edited on a different device.
[Not enough space on built-in memory]
●
There is no space left on the built-in memory or the card. When you copy pictures from
the built-in memory to the card (batch copy), the pictures are copied until the capacity of
the card becomes full.
[Built-In Memory Error]
●
Displayed when formatting built-in memory via computer, etc.
→ Reformat directly using camera. Data will be deleted.
[Memory card error. This card cannot be used in this camera. Format this card?]
●
The card format cannot be used with this camera.
→ Save needed data on a computer or other device, and then use [Format] on the
camera. (→28)
[Insert SD card again]
●
Access to card has failed.
→ Insert card again.
●
Try with a different card.
[This picture cannot be deleted]
[Copy could not be completed]
[Format built-in memory?]
[Try another card]
- 64 -
[System Error]
[Not enough memory on the card]
VQT3T39