Recording Motion Images - Panasonic Lumix DMC-LC20 Operating Instructions Manual

Recording Motion Images

1
2
• After recording the motion image, the status indicator blinks while
recording it in the memory card and after recording it, the status indicator
lights. Do not operate the camera while recording to the memory card.
• In motion image mode [
automatically and you cannot select [D. ZOOM], [PICT. SIZE] and
[QUALITY].
• In motion image mode [
• In motion image mode [
compensate the exposure.
[Preparations]
• Insert the card. (P15)
• Set the power switch to [ON]. (P17)
1
2,3,4
2
• When the focus is adjusted, the
3
• The status indicator 2 blinks when
• The audio REC starts simultaneously.
• The picture size is fixed at 320 a 240
10 s
4
• If the memory of the card becomes
• The motion image is recordable for
], [SENSITIVITY] is set to [AUTO]
], flash mode is set to Forced OFF [
], you cannot take pictures with burst mode or
Set the mode dial to motion image
mode [ ].
Center the subject on the LCD
monitor and press the shutter
button halfway.
focus indication 1 [¥] appears.
Pressing the shutter button fully,
the recording starts.
recording the motion image.
pixels.
Pressing the shutter button fully
again, recording stops.
full during the recording, the
recording is stopped automatically.
up to approximately 19 seconds per
capture.
].
29