Charging The Battery - Panasonic Lumix DMC-LC20 Operating Instructions Manual

Charging the Battery

1
Insert batteries into the charger.
2
Insert the charger into the electrical
outlet.
• The charge lamp A lights and
charge starts.
3
Charge is completed when the
charge lamp is no longer
illuminated.
ª Environment/charge error
• Charge in a place with a surrounding
temperature of 32 - 104 F (0 - 40 oC)
(also temperature of the battery).
• When charging starts, the charge lamp
lights.
If after charging starts the charge lamp
blinks, it indicates a charge error.
In this case, remove the charger from the
electrical outlet, take out batteries, check
whether the surrounding temperature or
the batteries are too hot or cold, and
charge again. An error cannot be
cancelled by turning the power off/on. If
after charging again the charge lamp still
blinks, consult your nearest servicentre.
• Use Panasonic AA Ni-MH (nickel-metal
hydride) Batteries.
13