[Intelligent Iso] - Panasonic Lumix DMC-FX55 Operating Instructions Manual

∫ Finely adjusting the white balance [
Use this to set the white balance manually.
• Set the white balance to [
[ ]/[ ].
1 Move 3 [
] several times until
[WB ADJUST.] appears and then
move 2/1 to adjust the white
balance.
• 2 [RED]:Move when the hue is bluish.
• 1 [BLUE]:Move when the hue is
reddish.
• Select [0] to return to the original white
balance.
2 Press [MENU/SET] to finish.
• You can also press the shutter
button halfway to finish.
• The white balance icon on the screen
turns red or blue.
About the white balance
• When you take a picture with the flash, the
white balance may not be properly adjusted if
the flash level is insufficient for the subject.
• The white balance setting is memorized
even if the camera is turned off. However,
the white balance setting for a scene
mode returns to [AWB] when the scene
mode is changed.
• The white balance cannot be set in the
following cases.
– In [SCENERY], [NIGHT PORTRAIT],
[NIGHT SCENERY], [FOOD], [PARTY],
[CANDLE LIGHT], [SUNSET],
[STARRY SKY], [FIREWORKS],
[BEACH], [SNOW] and
[AERIAL PHOTO] in scene mode.
] About the white balance fine adjustment
• You can finely adjust the white balance
independently for each white balance
]/[ ]/[ ]/
item.
• The white balance fine adjustment setting
is reflected in the picture when using the
flash.
• The white balance fine adjustment setting
is memorized even if the camera is turned
off.
• The white balance fine adjustment level in
[
white balance using [
• You cannot finely adjust the white balance
when [COL.MODE] (P65) is set to [B/W],
[SEPIA], [COOL] or [WARM].
Press [
menu and select the item to set. (P55)
The camera will automatically set the
optimal ISO sensitivity and the shutter
speed to the movement of the subject and
the surrounding brightness.
• One of the following maximum ISO
sensitivity levels can be selected. The
higher the value set for the ISO sensitivity,
the more the jitter is reduced but the
greater the amount of picture noise.
ISOMAX
• Jitter is avoided when taking pictures
indoors of a moving subject by increasing
Advanced (Recording pictures)
] returns to [0] when you reset the

[INTELLIGENT ISO]

Automatically setting the optimal
ISO sensitivity and shutter speed
] to display the [REC] mode
MENU
/SET
Item
OFF Intelligent ISO does not work.
ISOMAX
400 The ISO sensitivity
400
automatically increases up to
ISOMAX
800
800
the set value according to the
movement and brightness of
1250
1250
the subject.
].
Settings
57
VQT1J59