Taking Pictures That Match The Scene Being Recorded (Scene Mode) - Panasonic Lumix DMC-FX55 Operating Instructions Manual

Panasonic lumix dmc-fx55: user guide
Table of Contents

Advertisement

Advanced (Recording pictures)
Taking pictures that
match the scene being
recorded
(Scene mode)
When you select a scene mode to match
the subject and recording situation, the
camera sets the optimal exposure and hue
to obtain the desired picture.
• Refer to P43 to 49 and "About the
information
" for details about each
scene mode.
1 Move 3/4/2/1 to select the
scene mode.
• Move 4 at A to switch to the next
menu screen.
• You can switch menu screens from any
menu item by rotating the zoom lever.
2 Press [MENU/SET] to set.
• The menu screen is switched to the
recording screen in the selected scene
mode.
• To change the scene mode, press
[MENU/SET], then move 1, and repeat
1
2
steps
and
above.
42
VQT1J59
∫ About the information
• If you press [DISPLAY] when selecting a
• Refer to P37 for information about the
• The flash setting is memorized even if the
• When you take a picture with a scene
• When [MENU/SET] is pressed and the
A
• The following items cannot be set in scene
scene mode in step
each scene mode are displayed. (If you
press [DISPLAY] again, the screen
returns to the [SCENE MODE] menu.)
shutter speed.
camera is turned off. However, the scene
mode flash setting is reset to the initial
setting when the scene mode is changed.
mode that is not adequate for the
purpose, the hue of the picture may differ
from the actual scene.
menu screen is displayed, [
selected in the [SCENE MODE] menu.
You can set each of the settings by
moving 4 and selecting [REC] mode
menu [
] or [SETUP] menu [ ].
mode because the camera automatically
adjusts them to the optimal setting.
– [INTELLIGENT ISO]
– [SENSITIVITY]
– [COL.MODE]
1
, explanations about
] is

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents