Panasonic Lumix DMC-FS3 Operating Instructions Manual page 22

Preparation
[LCD MODE]
LCD
•
High angle mode is also canceled if you turn the camera off or [POWER SAVE] is activated.
•
The brightness of the pictures displayed on the LCD monitor is increased so some subjects
may appear differently from actuality on the LCD monitor. However, this does not affect the
recorded pictures.
•
The LCD monitor automatically returns to normal brightness after 30 seconds when recording
in Power LCD mode. Press any button to make the LCD monitor bright again.
•
If the screen is difficult to see because of light from the sun etc. shining on it, use your hand or
another object to block the light.
•
The number of recordable pictures decreases in Auto Power LCD mode, Power LCD mode and
High angle mode.
r [BEEP]
u [VOLUME]
•
When you connect the camera to a TV, the volume of the TV speakers does not change.
[GUIDE LINE]
•
The [PATTERN] setting is fixed to [
— [TRAVEL DATE]
•
Refer to P57 for details.
22
VQT1M97
These menu settings make it easier to see the LCD monitor when
you are in bright places or when you are holding the camera high
above your head.
[OFF]
„ [AUTO POWER LCD]:
The brightness is adjusted automatically depending on how bright
it is around the camera.
... [POWER LCD]:
The LCD monitor becomes brighter and easier to see even when
taking pictures outdoors.
Å [HIGH ANGLE]:
The LCD monitor is easier to see when taking pictures with the
camera held high above your head.
This allows you to set the beep and shutter sound.
r [BEEP LEVEL]:
[s] (Muted)
[t] (Low)
[u] (High)
[BEEP TONE]:
[ ]/[ ]/[ ]
1 2 3
Adjust the volume of the speaker to any of 7 levels.
Set the pattern of the guide lines displayed when taking pictures.
You can also set whether or not to have the recording information
displayed when the guide lines are displayed. (P38)
[REC. INFO.]:
[OFF]/[ON]
] in the intelligent auto mode.
Set the departure date and the return date of the vacation.
[OFF]/[SET]
[SHUTTER VOL.]:
[ ] (Muted)
[ ] (Low)
[ ] (High)
[SHUTTER TONE]:
[ ]/[ ]/[ ]
1 2 3
[PATTERN]:
[ ]/[ ]