Beko BFTF2716WH Service Manual page 43

The same procedures shall be repeated in the reverse order for this group to be mounted.
NOTE: ESD measures shall be taken during these processes.
12.7. Sensor Cover
The sensor cover shall be fixed with a tabbed connection. For this part to be removed, the tab on the
side shall be pressed and the cover shall be pulled.
12.8. Sliding Rails of the Vegetable Bowl
The vegetable compartment slides on 2 rails, one on the left and one on the right. Rails are locked to
the frame with tabs, there are no screw connections. The vegetable bowls shall be taken out for these
rails to be removed. Then the rail may be removed by pushing it up from the bottom surface.
For the rails to be remounted, the rail is fixed on the internal frame from the top and it is locked to the
internal frame by pushing from the bottom surface.
12.9. Sliding Rails of the Vegetable Bowl on the Second Level
Sensitivity: Public
BEKO THAI NF70CM REFRIGERATORS(USA)
43
09.09.2019 / REV NO: 01