Beko BFTF2716WH Service Manual page 42

BEKO THAI NF70CM REFRIGERATORS(USA)
09.09.2019 / REV NO: 01
locked in place with tabs. The boards may be demounted by releasing them off these tabs and by
disconnecting the sockets.
In products with U-1 boards, the board socket is on the rear wall of the refrigerator. For the board cover
group to be removed, the fixing screw and the board box cover should be taken out. The main board is
locked in place with tabs. The boards may be demounted by releasing them off these tabs and by
disconnecting the sockets.
12.6. Cooling Compartment Lighting Group and LED Board
The lighting glass shown is fixed to the plastic of the internal frame with tabs. The connection is
established without screws. For the lighting glass to be removed, the lighting glass shall be separated
with a sharp tool either from the corner above or below, and then pulled by hand and released from the
internal frame. When the lighting glass is removed, the LED board inside can be accessed. To remove
the LED board, demount the socket connection.
42
Sensitivity: Public