Beko BFTF2716WH Service Manual page 39

BEKO THAI NF70CM REFRIGERATORS(USA)
09.09.2019 / REV NO: 01
12.4. Changing the Direction of the Door
To change the direction of the door, first the hinge cover shall be removed with a flat head screwdriver
as explained in step 4.1. The middle hinge is removed and the lower and upper doors are taken out
(See 4.2). The screws holding the upper hinge are removed with a torx head screwdriver.
The stopper on the opening side in line with the upper hinge is removed with a flat head screwdriver or
a box cutter.
Then, the upper hinge removed shall be installed on the other side using 2 screws.
The stopper that will cover the 2 holes on the side the upper hinge is removed shall be mounted on the
holes where the upper hinge is removed by hand.
The steps for removing the upper hinge cover shall be followed in the reverse order and the cover
shall be remounted on the hinge.
The screws of the lower hinge shall be removed with the same method. Firstly, the stopper on the
adjustable leg is removed with a screwdriver and the adjustable leg is removed. Then, the screws of
the lower hinge are removed.
39
Sensitivity: Public