Table of Contents
Advertisement
Setup
Connect the antennas
1) Place the antenna evenly over the antenna terminal
located at the upper left or right corner of the rear
panel.
2) Turn the antenna clockwise until it is fully connected.
Do not over tighten.
3) Rotate the antenna upwards for the best possible
reception.
1)
• The antennas are required for both Bluetooth and Wi-Fi
functions.
5
2)
3)
Optional
If you are connecting the AVR to a wired network, connect an
Ethernet cable (not included) between the AVR and your router.
Do not connect the Ethernet cable if you are connecting the
AVR to a wireless network.
Router
LAN port
Advertisement
Table of Contents
