Extel LUCE500 Quick Start Manual

LUCE500
EN
MOTOR DRIVE
FOR SLIDING GATES
V1
Ref. 761001
Thank you for purchasing an EXTEL automatic gate opener.
This document is a quick start guide detailing the main installation steps as well as the equipment required. To perform the installation, please
download the installation manual at the following address: www.avidsen.com
Warning: The safety instructions and installation instructions can be found in the installation manual. Follow all these instructions, as an
incorrect installation can cause serious injuries.

1. DESCRIPTION

1 2
x 1 x 8
9 10 10
x 4 x 1 x 6
1
24 V geared motor
2
50cm rack and screws
3
Flashing light and screws
4
Remote control
5
Release key

2. EQUIPMENT REQUIRED (NOT SUPPLIED)

The tools and screws required for the installation must be in good condition and compliant with applicable safety standards.
clé plate de 17
2 2 3 3
x 12 x 12 x 1
10 10 11
x 6 x 4 x 1
6
Floor fastening pin
7
M8 nut
8
Ø8 washer
9
Ø8 spring washer
10
Photocells and their screws
3 4 5
x 2 x 2 x 2
12
x 1
11
Disengagement label
12
Installation template
13
Backup fuses
ø6mm
ciment sable
7
x 8
6
x 2 x 4
13
x 2
Photocells
10m cable
4 x 6/10
8
x 8