3.1.2.1 Status
This function is available to check the printer's sensor status. When enter the [Status] option,
you will see following message.
Paper Len.
Gap Size
Intensity
Ref. Level
3.1.2.2 Calibration
This option is used to set the media sensor type and calibrate the selected sensor. We
recommend to calibrate the sensor before printing when changing the media.
Gap Mode
↓
Automatic
↓
Manual
↓
Pre-Printed
↓
Exit
812
24
3
512
Calibration
Bline Mode
↓
Automatic
↓
Manual
↓
Pre-Printed
↓
Exit
Cont. Mode
↓
Automatic
↓
Manual
↓
Exit
42
Exit