AGFA CG Triumvirate TT042-50 Series User Manual page 47

This option is used to set delimiter character. Press the
cursor from left digit to right digit, and press the
"9" or "A" to "F". Press the
key to cancel the setting and return to the previous menu.
3.1.1-2.13 Media Power Up:
Print Setup
Format Prefix
Delimiter Char
> Media Power Up
This option is used to set the action of the media when you turn on the printer. Printer
default setting is No Motion. When enter this list, the print mode in the right side of " >" icon
is the printer current setting. Press
mode and press
the setting and return to the previous menu.
Selections
Feed
Calibration
Length
No Motion
3.1.1-2.14 Head Close:
Print Setup
Delimiter Char
Media Power Up
> Head Close
This option is used to set the action of the media when you close the printhead. Printer
default setting is No Motion. When enter this list, the print mode in the right side of " >" icon
is the printer current setting. Press
mode and press
the setting and return to the previous menu.
button to set the value into printer. Press
13/17
Media Power U
Length
> No Motion
Exit
button to enable the setting. Press
Printer will advance one label
Printer will calibration the sensor levels, determine length and
feed label
Printer determine length and feed label
Printer will not move media
14/17
Head Close
Length
> No Motion
Exit
button to enable the setting. Press
40
button to set the value from "0" to
4/5
and to select the different print
Description
4/5
and to select the different print
button to move the
key to cancel
key to cancel