Download Print this page

Gemo DP102-V Manual page 2

Digital potentiometer

Advertisement

GEMO
This device and its packing is NOT litter and may NOT be disposed of with domestic waste. Please return
this device and its packing to an appropriate recycling point at the end of its service life.
Please read this user manual carefully and completely before installation and use. Please take into
consideration all warnings mentioned in this manual.
DP102-V and/or DP102-mA is suitable only for permanent panel type mounting
Installation and use of this device must be done by qualified, authorized and trained technical personnel only.
Inspect device carefully before installation. Do not install and use broken and defective devices.
Do not disassemble device. Do not make any repair on any part of the device. There is no accessible part
inside the device. Please contact to manufacturer for broken and defective devices.
Do not use device in environments subject to flammable, explosive and corrosive gases and/or substances.
This device is designed for applications only in industrial environments. This device is not suitable for medical
and residential use. This device is not suitable for use related with human health and safety. This device is
not suitable for automotive, military and marine use.
Do not allow children and unauthorized people to use this device.
Before installation and any technical work, disconnect the power supply and mains connections.
Check the power supply voltage level before power on, and make sure voltage level is in specified limits.
Check quality of neutral line. Improper neutral line may give permanent damage to the device.
Connect an external power switch and an external fuse (1A, 250VAC) to the power supply line that are easily
accessible for rapid intervention.
Use appropriate cables for power supply and mains connections. Apply safety regulations during installation.
Install the device in a well ventilated place. Install the device permanently into a proper panel cut-out. Fix the
device with two fasteners supplied with the device. Only front panel must be accessible after installation is
completed.
Do not operate the device other then the environmental conditions given in Technical Specification.
Do not operate the device in environments that may cause conductive pollution.
Take precautions against negative environmental conditions like humidity, vibration, pollution and high/low
temperature during installation.
Keep device, signal cables and communication cables away from circuit breakers, power cables and
devices/cables emitting electrical noise. Use shielded and twisted signal and communication cables and
connect shield to earth ground on device side. Keep length of signal and communication cables less than 3m.
In your applications, always use separate and independent mechanical and/or electromechanical
devices/apparatus to support DP102-V and/or DP102-mA to handle emergency cases.
Use insulated cable end-sleeves at the end of cables screwed to the device connector terminals.
Maximum torque for screwing; 0.5 N.m.
Please check www.gemo.com.tr for latest device and documentation updates regularly. All updates and all
information are subject to change without notice.
This device is designed for basic control applications only in industrial environments.
µP based, digital potentiometer
Analog output: 0-10V or 4-20mA; should be specified during order
Menu entry and analog output control via front keys
Analog output control via digital inputs
Adjustable scale upper and lower level
Adjustable upper and lower limit for SET
Separate function selection for the front keys and digital inputs to control analog output
Password protection
SECU setting for enable/disable SET adjust menu entry.
High accuracy
EEPROM memory to store settings
Easy connection with plug-in connectors
Gürbüzoğlu Elektronik San. ve Tic. Ltd. Şti.
Çamlıtepe Cad. No:297 / 3-4 Siteler, Ankara, Türkiye
Tel: +90-312-3503900, Fax: +90-312-3511117
INSTALLATION, USE and WARNINGS
GENERAL SPECIFICATION
2
http://www.gemo.com.tr
e-posta: info@gemo.com.tr

Advertisement

loading

This manual is also suitable for:

Dp102-ma