Tx Power; Auto Step; Step; Narrow - Yaesu ADMS-15 Instruction Manual

• Tx Power

This item selects the TX Power.

• AUTO STEP

By ticking the checkbox of this item, the frequency step is set to "AUTO" automatically provides a suit-
able frequency step (frequency variation by rotating the DIAL knob) according to the frequency band. By
Turning off the checkbox, the step setting become selectable.

• Step

Sets the channel step for receiving channels.

• Narrow

By ticking the checkbox of this item, switches to the Narrow FM mode.

• Clock Shift

When an internal spurious signal occurs due to the microcomputer clock, turn this setting on (tick the
checkbox). This may improve the situation.
Usually, this item is set to "OFF" (un-tick the checkbox).

• Comment

Comments may be added to the edited VFO bands. Up to 255 letters can be used. This function is useful
in organizing the VFO bands by, for example, applying a category name to each VFO bands. These com-
ments are not transferred to the FTM-200DR/DE.
28