Initial Settings; General Operation; Language; Picture - Toshiba SD-24VESE Service Manual

Before Operation - DVD part (Continued)

Initial Settings

You can set your own Personal Preferences on the player.

General Operation

1 1
Press SETUP.
The setup menu appears.
Disc Audio
Disc Subtitle
Disc Menu
Rating
Area Code
TV Aspect
Menu Language
Progressive Scan
Digital Audio Output
Others
2 2
Use v/V to select the desired item.
The screen will show the current setting for the
selected option, as well as alternate setting(s).
3 3
While the desired option is selected, press B,
then v/V to select the desired setting.
4 4
Press ENTER/OK to confirm your selection.
Some items require additional steps.
5 5
Press SETUP, RETURN, or PLAY N to exit the
setup menu.

Language

Disc Language
DVD
Select a language for the disc's Menu, Audio, and
Subtitle.
Original : The original language set for the disc is selected.
Other : To select another language, press number buttons to
enter the corresponding 4-digit number according to the lan-
guage code list on page 38. If you enter the wrong language
code, press CLEAR.
Disc Audio
Disc Subtitle
Disc Menu
Rating
Area Code
TV Aspect
Menu Language
Progressive Scan
Digital Audio Output
Others
Note
Disc Language selection may not work for some DVDs.
Menu Language
Select a language for the setup menu. This is the menu
you see when you press SETUP.
Disc Audio
Disc Subtitle
Disc Menu
Rating
Area Code
TV Aspect
Menu Language
Progressive Scan
Di it l A di O t
Original
English
Spanish
German
Italian
Portuguese
Greek
French
Chinese
Other – – – –
Original
English
Spanish
German
Italian
Portuguese
Greek
French
Chinese
Other – – – –
English
Spanish
German
Italian
Portuguese
Greek
t

Picture

TV Aspect
DVD
4:3 Letterbox: Select when a standard 4:3 TV is
connected. Displays theatrical images with masking
bars above and below the picture.
4:3 Panscan: Select when a conventional TV set is
connected. The video material formatted in the Pan &
Scan style is played back in that style (Both sides of the
picture are cut off.)
16:9 Wide: Select when a 16:9 wide TV is connected.
Disc Audio
Disc Subtitle
Disc Menu
Rating
Area Code
TV Aspect
Menu Language
Progressive Scan
Digital Audio Output
Others
Progressive Scan
Progressive Scan Video provides the highest quality
pictures with less flickering.
If you are using the COMPONENT/PROGRESSIVE
SCAN VIDEO OUT jacks, but are connecting the
DVD+VCR to a standard (analog) television, set
Progressive Scan to Off.
If you are using the Component Video jacks for connec-
tion to a TV or monitor that is compatible with a pro-
gressive scan signal, set Progressive Scan to On.
This unit can only output 625p progressive scan
picture.
Note
Progressive Scan will not be displayed in the setup menu
when the rear switch is set at RGB position.
Caution
Once the setting for progressive scan output is entered,
an image will only be visible on a progressive scan
compatible TV or monitor. If you set Progressive Scan
to On in error, you must reset the unit.
1) Remove any disc from the unit and close the disc
tray. See that "dISC" is displayed on the display win-
dow.
2) Press STOP (9 9 ) and hold it for five seconds before
releasing it. The video output will be restored to the
standard setting and a picture will once again be visi-
ble on a conventional analog TV or monitor.
1-24
4:3 Letterbox
4:3 Panscan
16:9 Wide
DVD