Advertisement
Quick Links
Assembly Instructions
VersaLoft Mission Hanging Daybed
Thank you for choosing
Furniture Co.
We hope that this piece brings you many years of enjoyment!
For help with assembling your furniture,
or if you have missing hardware, please email us at
help@aandlfurniture.com or call us at 866-896-5747
Advertisement
Summary of Contents for A&L Furniture VersaLoft
- Page 1 Assembly Instructions VersaLoft Mission Hanging Daybed Thank you for choosing Furniture Co. We hope that this piece brings you many years of enjoyment! For help with assembling your furniture, or if you have missing hardware, please email us at help@aandlfurniture.com or call us at 866-896-5747...
- Page 2 HARDWARE PARTS (included) (included) Headboards (2) 4” Eyebolts (4) 2¾” Bolts (12) Backrest (1) Dowel Nuts (8) Front Rail (1) 1¾” Screws (30) Allen Wrench (1) Mattress Boards (7) Square Drive Bit (1) TOOLS NEEDED Chains or Ropes (4) Power Screwdriver STEP 1 Insert two dowel nuts in the holes in each end of the bottom backrest board and on the inside of the front rail.
- Page 3 STEP 4 Place the mattress boards in the frame and space them evenly. Fasten with 1¾” screws, 4 screws per board. (See photos 5 & 6.) photo 7 photo 5 photo 6 STEP 5 Find the 4 holes in the front and back posts close to the top. Insert the 4” eyebolts & turn into the inserts. (See photo 7).
- Page 4 The rope can also be adjusted to make the swing hang a little higher or lower. (See series of photos below.) Note: You will receive the ropes adjusted short in length. The photos show the ropes being adjusted long in length.