Page 1
Assembly Instructions for 44” Square Walk-In Table Tools Needed: Parts List: Power drill or screwdriver Table Top—2 pieces #2 Square Drive Bit 2”x2”x35” Strips—2 pieces Table Leg Assemblies—2 pieces Hardware: Bench Tops - 4 pieces 4 – 2¾” Wafer Head Bolts 1”x5½”x14½”...
Page 2
Step 4 Now take the bench leg assemblies in Step 2 and place them on the seat. Center with the 2x2 on the bench top. Attach with two 2” screws on each end. (See photos 6 & 7.) photo 7 photo 6 *Center on 2x2 strips* Step 5...