Advertisement
Table of Contents
DISPLAY AND CROWN / BUTTON OPERATION
Dual time of 24 hour regulator hand
(Difference in time correct, move together
with dual time of 60 minute regulator hand)
Second hand
Dual time of 60 minute regulator hand
(Difference in time correct, move together with
dual time of 24 hour regulator hand)
ADJUSTING THE DUAL TIME OF 24 HOUR REGULATOR AND
DUAL TIME OF 60 MINUTE REGULATOR HANDS POSITION
Before setting the time , check if the dual time of 24 hour regulator and dual time of 60 minute
regulator hands are in the "0"(12 o'clock) position.
If either of the dual time of 24 hour regulator and dual time of 60 minute regulator hands
are not in the "0" position, reset them following the procedure below.
The battery setting and after battery change, please execute the "0" position adjustment.
1.Pull out the crown
VD35:second click
VD36:first click
2.Keep the buttons A & B
pressed at the same time
more than 2 seconds,
and then release the buttons.
*Dual time of 24 hour regulator and
dual time of 60 minute regulator hands
moves. Returned to whereit was.
OPERATION
Hour hand
A
B
3.Press button A or B to reset the
dual time of 24 hour regulator and
dual time of 60 minute regulator hands
to "0"position.
*By pressing button A the dual time of 24 hour regulator hand
move clockwise. (+ 1 step / push)
*By pressing button B the dual time of 60 minute regulator hand
move clockwise. (+ 1 step / push)
*Press and hold the button, possible to fast-forward modification.
Minute hand
Button A: - 1 hour / push
Dual time of 24 hour regulator
hand adjustment
Second position
First position
VD35:Date setting
VD36:Time setting
Crown at normal position
Button B: + 1 hour / push
Dual time of 24 hour regulator
hand adjustment
A
B
4.Push the crown back to
the normal position.
Version-01
Cal.VD3 Series
(VD35B/36B)
VD35:Time setting
8
Advertisement
Table of Contents
Related Manuals for TMI Products Cal.VD3 Series
Summary of Contents for TMI Products Cal.VD3 Series
- Page 1 Version-01 OPERATION Cal.VD3 Series (VD35B/36B) DISPLAY AND CROWN / BUTTON OPERATION Dual time of 24 hour regulator hand Minute hand (Difference in time correct, move together with dual time of 60 minute regulator hand) Button A: - 1 hour / push...
- Page 2 Version-01 OPERATION Cal.VD3 Series (VD35B/36B) TIME SETTING 1.Pull out the crown when the second hand is at the 12 o'clock position. [ Crown position ] VD35:second click VD36:first click 2.Turn the crown to set the hour and minute hands. (Check that AM/PM is set correctly) 3.Push the crown back normal position in accordance with...
- Page 3 Version-01 OPERATION Cal.VD3 Series (VD35B/36B) DATE SETTING (Cal.VD35 only) *Before setting the date, be sure to set the time. 1.Pull out the crown to the first click. 2.Turn the crown to clockwise until the next date appears. 3.Push the crown back in to the normal position.
Need help?
Do you have a question about the Cal.VD3 Series and is the answer not in the manual?
Questions and answers