HP ProLiant DL585 G2 Quickspecs page 11

QuickSpecs
Standard Features
Required Cabling Required Cabling Required Cabling Required Cabling
OS Support OS Support OS Support OS Support
Rack Airflow Rack Airflow Rack Airflow Rack Airflow
Requirements Requirements Requirements Requirements
For required cabling information, refer to the HP Web site at:
Microsoft Windows Server 2003
Microsoft Windows Server 2008
Red Hat Enterprise Linux
SUSE Linux Enterprise Server
Sun Solaris
VMware Virtualization Software
NOTE: For a more complete and up-to-date listing of supported OSs and versions, please visit our OS NOTE: NOTE: NOTE:
Support Matrix at: http://www.hp.com/go/supportos.
NOTE: For an up-to-date listing of the latest software and drivers available for your server, please select NOTE: NOTE: NOTE:
your server: www.hp.com/servers/dl585-g2.
NOTE: For more Linux OS support & certification information, please visit our the ProLiant & NOTE: NOTE: NOTE:
BladeSystem Server Linux matrix at:
http://h18004.www1.hp.com/products/servers/linux/hpLinuxcert.html
NOTE: For more information on HP's Certified and Supported ProLiant Servers, please visit the VMware NOTE: NOTE: NOTE:
Server Support Matrix at:
http://h18004.www1.hp.com/products/servers/software/vmware/hpvmwarecert.html
NOTE: NOTE: NOTE: NOTE: For more complete and up-to-date information on how to buy server operating systems from HP
please visit the OS product site at:
Rack 10000 series Cabinets Rack 10000 series Cabinets Rack 10000 series Cabinets Rack 10000 series Cabinets
The increasing power of new high-performance processor technology requires increased cooling
efficiency for rack-mounted servers. The 10000 Series Racks provide enhanced airflow for maximum
cooling, allowing these racks to be fully loaded with servers using the latest processors.
CAUTION: CAUTION: CAUTION: If a third-party rack is used, observe the following additional requirements to ensure CAUTION:
adequate airflow and to prevent damage to the equipment:
Front and rear doors: If your 42U server rack includes closing front and rear doors, you
must allow 5,350 sq cm (830 square inches) of hole evenly distributed from top to bottom
to permit adequate airflow (equivalent to the required 64 percent open area for ventilation).
Side: The clearance between the installed rack component and the side panels of the rack
must be a minimum of 7 cm (2.75 inches).
CAUTION: CAUTION: CAUTION: Always use blanking panels to fill all remaining empty front panel U-spaces in the rack. This CAUTION:
arrangement ensures proper airflow. Using a rack without blanking panels results in improper cooling
that can lead to thermal damage.
NOTE: For additional information, refer to the Setup and Installation Guide or the Documentation CD NOTE: NOTE: NOTE:
provided with the server, or to the server documentation located in the Support section at the following
URL: www.hp.com/servers/dl585-g2.
DA - 12575
http://h18004.www1.hp.com/products/servers/software/OEM.html
Canada — Version 37 — May 28, 2008
HP ProLiant DL585 Generation 2 (G2) HP ProLiant DL585 Generation 2 (G2) HP ProLiant DL585 Generation 2 (G2) HP ProLiant DL585 Generation 2 (G2)
www.hp.com/servers/dl585-g2
Page 11