Configuration Information - Factory Integrated Models; Step 1: Base Configuration - HP ProLiant DL585 G2 Quickspecs

QuickSpecs

Configuration Information - Factory Integrated Models

NOTE: This section lists some of the steps required to configure a Factory Integrated Model. To ensure only valid NOTE: NOTE: NOTE:
configurations are ordered, HP recommends the use of an HP approved configurator. Contact your local sales
representative for information on CTO product offerings and requirements.
NOTE: HP does not allow factory integration of options into standard models listed above. Configure-to-order NOTE: NOTE: NOTE:
servers must start with a CTO Chassis.
NOTE: This product offering does not support HP Factory Express Server Configuration Level 1. NOTE: NOTE: NOTE:
NOTE: FIO indicates that this option only available as a Factory Installable Option. NOTE: NOTE: NOTE:

Step 1: Base Configuration

Step 1: Base Configuration Step 1: Base Configuration Step 1: Base Configuration
Models Models Models Models
Step 2: Choose Required Options (only one of the following from each list unless otherwise Step 2: Choose Required Options (only one of the following from each list unless otherwise Step 2: Choose Required Options (only one of the following from each list unless otherwise Step 2: Choose Required Options (only one of the following from each list unless otherwise
noted) noted) noted) noted)
Processors Processors Processors Processors
Base Memory Base Memory Base Memory Base Memory
HP ProLiant DL585 G2 Rack CTO Chassis
Factory Integrated Models ship with: Factory Integrated Models ship with: Factory Integrated Models ship with: Factory Integrated Models ship with:
Two embedded NC371i Multifunction Gigabit Network Adapters
Integrated Lights-Out 2 (iLO 2) Standard management
Six (6) Redundant Hot Plug Fans
One Hot Plug Power Supply
Rack 4U Form Factor
AMD Opteron™ 8224SE 3.2 GHz-1 MB Dual-Core Processor (120W) 2P Option Kit
NOTE: If four processors are desired, select one 458932-L21 and one 458932-B21. NOTE: NOTE: NOTE:
AMD Opteron™ 8222 3.0 GHz-1 MB Dual-Core Processor (95W) 2P Option Kit
NOTE: If four processors are desired, select one 458933-L21 and one 458933-B21. NOTE: NOTE: NOTE:
AMD Opteron™ 8222SE 3.0 GHz-1 MB Dual-Core Processor (120W) 2P Option Kit
NOTE: If four processors are desired, select one 448184-L21 and one 448184-B21. NOTE: NOTE: NOTE:
AMD Opteron™ 8220 2.8 GHz-1 MB Dual-Core Processor (95W) 2P Option Kit
NOTE: If four processors are desired, select one 439728-L21 and one 439728-B21. NOTE: NOTE: NOTE:
AMD Opteron™ 8218 2.6 GHz-1 MB Dual-Core Processor 2P Option Kit
NOTE: If four processors are desired, select one 413933-L21 and one 413933-B21. NOTE: NOTE: NOTE:
AMD Opteron™ 8216 2.4 GHz-1 MB Dual-Core Processor 2P Option Kit
NOTE: If four processors are desired, select one 413932-L21 and one 413932-B21. NOTE: NOTE: NOTE:
AMD Opteron™ 8214 2.2 GHz-1 MB Dual-Core Processor 2P Option Kit
NOTE: If four processors are desired, select one 416734-L21 and one 416734-B21. NOTE: NOTE: NOTE:
1 GB REG PC2-5300 2 x 512 MB Single Rank Kit
2 GB REG PC2-5300 2 x 1 GB Single Rank Kit
4 GB REG PC2-5300 2 x 2 GB Dual Rank Kit
8 GB REG PC2-5300 2 x 4 GB Dual Rank Kit
NOTE: Memory must be ordered in like-pairs, i.e. two of the same size. NOTE: NOTE: NOTE:
NOTE: If all four banks on a memory node are populated, the maximum memory NOTE: NOTE: NOTE:
clock speed will be 533 MHz. If two or fewer banks on a memory node are
populated, the maximum memory clock speed will be 667 MHz.
DA - 12575 Canada — Version 37 — May 28, 2008
HP ProLiant DL585 Generation 2 (G2) HP ProLiant DL585 Generation 2 (G2) HP ProLiant DL585 Generation 2 (G2) HP ProLiant DL585 Generation 2 (G2)
418633-B21
458932-L21
458933-L21
448184-L21
439728-L21
413933-L21
413932-L21
416734-L21
408850-B21
408851-B21
408853-B21
408854-B21
Page 18