Advertisement
KEY FEATURES
EXTERNAL CALIBRATION PORT: The LF-8000 has two calibration ports on the
front panel for both soldering/desoldering for quick and convenient precision
temperature adjustments.
DELAYED SUCTION: To eliminate the problem of solder clogging up the tip, a
delayed switch feature has been incorporated for the unit that allows the pump to
continue sucking for 1.5 seconds after the actuator switch is released.
*LIGHTWEIGHT SOLDERING IRON: Ergonomic mini handle that stays cool and
prevents operator fatigue.
*OPTIONAL TWEEZERS: This additional feature is specially designed for SMD
chips, SOT, Flat pack ICs' etc. rework. Tweezers TWZ100 is equipped with 32V/50W
x 2 conventional nichrome heater, which can be interchangeable with soldering iron
210ESD as an option.
*ENERGY SAVER: After the station has been idle for more than 15 minutes, this new
feature will automatically knick in. When the "Pause" LED is lit, the energy saver
feature has engaged, decreasing tip temperature by 1/3 which cuts power consumption
and extends tip life.
* CELSIUS/FAHRENHEIT SWITCH: To address the global market place, a
convenient switch has been incorporated to easily convert from one common measure
to another.
PRODUCT DESCRIPTION
LF-8000 operates basically the same as the standard digital readout 988D but with the
high power 32V/100W soldering and desoldering irons which are specially designed
for lead-free soldering works to meet RoHS requirement.
This unit built in a self-contained, oil free, maintenance free, and quiet running
vacuum pump which is electronically controlled and will not overload with
continuous use, eliminating the need for additional shop air. The vacuum pump
provides up to 50cm/Hg (20in/Hg) suction power, activated by a push button
switching circuit located on the desoldering iron housing. Internal solder collector in
handpiece is quickly and easily removed for cleaning. The inside mesh aluminum
cooling strip has better solder chip adherence. Also the ventilation slots makes for a
1
Advertisement
