1. Manuals
  2. Brands
  3. Xytronic Manuals
  4. Soldering Gun
  5. LF-1700
  6. Instruction manual

Xytronic LF-1700 Instruction Manual

Temperature controlled
Hide thumbs

Advertisement

Table of Contents

Instruction Manual
for
Temperature Controlled
Soldering Station
LF-1700

Advertisement

Table of Contents
loading

Related Manuals for Xytronic LF-1700

Summary of Contents for Xytronic LF-1700

  • Page 1 Instruction Manual Temperature Controlled Soldering Station LF-1700...

  • Page 2: Key Features

    INTRODUCTION Thank you for purchasing Xytronic’s high power soldering station – the best solution for your soldering equipment needs especially for lead free applications! We believe that you will be more than satisfied with many features and the versatility of your new soldering station.

  • Page 3: Product Description

    The LF-1700 incorporates electronic circuitry which enables the user to alter tip temperature from 150 to 480℃ (302-896℉) without changing tips or heating elements.
  • Page 4 product make it the ideal tool for service and repair technicians as well as production line soldering operations. This unit is developed to meet the present and future lead-free soldering needs of the electronic production industry and is ideal for use at any AC outlet.

  • Page 5: Specifications

    Rear side ○ ,9 AC Power cord in-let ○ ,10 Fuse ⑪ Earth Jack Fig. 1 Soldering iron assembly SPECIFICATIONS: Model LF-1700 Input 220-240Vac 50Hz Output 100W Fuse (Slow type) 150℃-480℃（302℉-896℉） Temperature Range Temperature Correction +99℃~-99℃/+178℉~-178℉ Range 150℃/302℉ F-1: “000”...

  • Page 6: Working Temperature

    WORKING TEMPERATURE To meet RoHS requirements, the 60/40 solder alloys are not allowed in the production process. The lead free solder alloys require a working temperature of 30℃ ( 54℉ ) higher than previous generation electrical soldering. The working temperature of solder is detailed below and can vary from manufacture to manufacture.

  • Page 7: Parameter Setting

    CAUTIONS: REMEMBER, THE TIP IS HOT! The tip and barrel of the solder wand will cause serious burns if they are allowed to contact skin. Always return the solder wand to the safety holder after each use. DO NOT WORK ON LIVE CIRCUITS Before working on any mains powered equipment, make sure that it is turned off, and the mains plug is removed from the power point.
  • Page 8 enters the Password Set status. At this moment, the LED displays the pre-set value. Press “▲” or “▼” key to change password set value. If the user sets “000” that means the unit will be under the status of no password. If the user sets “100” then means the unit will be under the password status.
  • Page 9 function, indicating the temperature of the window shows the current status. Press "▲" or "▼" key to change the temperature selection status. It expressed as degrees Celsius temperature value If set to ℃; it shows as degrees Fahrenheit temperature if set to ℉ COMMON CAUSES OF TIP UNWETTING 1.

  • Page 10: General Cleaning

    MAINTENANCE AND DRESSING Tips can be changed or replaced simply by unscrewing the knurled nut barrel assembly. The station must be switched off and allowed to cool before this operation as damage may result if the system is left on without the tip in place! After removing the tip, blow out any oxide dust that may have formed in the tip retaining area of the barrel.

Table of Contents