Related Manuals for Jetting JetLogger V0
Summary of Contents for Jetting JetLogger V0
- Page 1 JetLogger Product model/type: V0-V1-V2-V3 V.21.04 JETLOGGER SAFETY, INSTALLATION AND OPERATIONS MANUAL D A R E T O D O I T D I F F E R E N T L Y .
- Page 2 For permission requests, write to the publisher, addressed “Attention: Permissions Coordinator” at the address below. Jetting AB, Murgatan 1, 522 30 Tidaholm, Sweden jetting.se info@jetting.se...
- Page 3 Failure to follow these instructions could result in serious personal injury or death. Caution: Noise will exceed 70 db Manufacturer Jetting AB Murgatan 1 522 30 Tidaholm Sweden jetting.se...
-
Page 4: Table Of Contents
Table of contents Section Page Description of the product How to use the JetLogger with V0 How to use the JetLogger with V1/V2/V3 How to start the JetLogger App Set up tablet for crash test protocol Set up tablet for new session Do a new session with last used data Open old session Add a new pipe to tablet... -
Page 5: Description Of The Product 1
The JetLogger is a professional documentation system for the installer/network owner who need an efficient and professional electronic, documentation of the cable blowing process. JetLogger is developed together with installers and network owners and can be used with Jetting’s cable blowing machines models V0, V1, V2 and V3 prepared for JetLogger. -
Page 6: How To Use The Jetlogger With V0
2. How to use JetLogger with V0 • The JetLogger system for the V0 is integrated in the transport box of the machine. • Check that the V0 is connected to the tablet and the machine by the USB cable. •... -
Page 7: How To Use The Jetlogger With
3. How to use JetLogger with V1/V2/V3 • The JetLogger system for model V1, V2, V3 is a stand alone system (Log Box) connected with the machine by the supplied cable. • Connect the machine and the Log Box with the supplied cable. •... -
Page 8: How To Start The Jetlogger App
4. How to start the JetLogger App When you open the Jet Logger App you'll se the main Log menu, in the top you can: • Change the language by pushing the flag. • See the software version. • See time, and battery status of the tablet. •... -
Page 9: Set Up Tablet For Crash Test Protocol
5. Set up tablet for crash test protocol • You should always start with doing a crash test for that special cable and pipe you will be using for the job. • Start with pushing on 'Crash test protocol' and this menu appears: •... -
Page 10: Set Up Tablet For New Session
6. Set up tablet for new session • Start with pressing on 'New Session' in the main menu. This menu should appear: • Fill out the items in the protocol (the yellow boxes must be filled in). • Chose pipe. You will see the list of pipes that are stored in the memory. If not already stored you can use 'Add pipe' either from the main menu or from the 'New Session Menu'. - Page 11 • Type in compressor brand and model. If air pressure can be shown as max 20 bars. If above 20 bars, the report will show 20 bars. • Note if you are using oil separator and aftercooler to your compressor and select that in the protocol. •...
-
Page 12: Do A New Session With Last Used Data
7. Do a new session with last used data • Reset the machine counter. • Start with tab on 'New session with last used data' in the main menu and this menu appears: • Now all basic information is filled in like former session. You only must fill in boxes that are yellow (address and pipe-cable temperature). -
Page 13: Open Old Session
8. Open old session • If you want to open an old session, then press 'Old Session' in the main menu and this menu appears: • All the sessions are stored with the latest session on top. • Now you can choose between 'Open' or 'Send' your saved sessions. •... -
Page 14: Add A New Pipe To Tablet
9. Add a new pipe to tablet • If you want to add a new pipe to the JetLogger, then press on 'Add pipe' in the main menu and this menu appears: • You can choose to add a new pipe, edit or delete the one you already have added. •... -
Page 15: Delete Session, Save And Go Back Or Save And Send 11
11. Delete session, save and go back or save and send • After you closed a session you can choose to: - Delete session If you delete it you won't be able to get it back. - Save and back If you chose this, the protocol will be stored in 'Old sessions'. - Page 16 How to set up a mail account on your tablet Start the tablet and go to settings. Choose 'Accounts and backup', press 'Accounts' and then 'Add account'. Follow the steps in the tablet. The OCPC = Intelligent pipe/cable combination for optimal fiber blowing conditions The JetLogger has an intelligent pipe/cable combination build in, the Optimal Cable Pipe Combination system (OCPC system).
-
Page 17: Documentation And Disposal
+46 502-65 90 10, info@jetting.se. Documentation feedback Comments to our product documentation can be sent to info@jetting.se. We appreciate your comments. Disposal Please follow the regulations for your country regarding how to recycle parts and dispose products. -
Page 18: Ec Declaration Of Conformity
14. EC Declaration of Conformity Håkan Johansson D A R E T O D O I T D I F F E R E N T L Y . -
Page 19: Notes
15. Notes D A R E T O D O I T D I F F E R E N T L Y . - Page 20 D A R E T O D O I T D I F F E R E N T L Y . JETLOGGER SAFETY, INSTALLATION AND OPERATIONS MANUAL...